SCX-4623F
Fax capability joins print, scan, and copy in the Samsung SCX-4623F, a workgroup multifunction for offices that still move paper by fax. It handles the full document lifecycle from one sturdy desktop unit.
It runs on the MLT-D105S or the higher-yield MLT-D105L. Compatible cartridges are the economical pick; genuine OEM cartridges are the original pick. Fast shipping from Clever Supplies.
Toner Cartridges for SCX-4623F
This printer works with the following toner cartridges:
- Samsung MLT-D105S
- Samsung MLT-D105L
More Samsung Printers
- ML-1910
- ML-1915
- ML-2525
- ML-2525W
- ML-2545
- ML-2580N
- SCX-4600
- SCX-4623FN
- SCX-4623FW
- SF-650
- SF-650P
- ML-2526
- ML-2581
- SCX-4623
- ML-2580
- ML-2540
- ML-2540R
Frequently Asked Questions
Prints from my SCX-4623F come out with toner that brushes right off — is that a fuser problem or bad toner?
When toner sits on the surface instead of melting into the fibers, the fuser — the hot roller at the SCX-4623F's output — is the prime suspect. If plain paper also smudges with a fresh MLT-D105S installed, the fuser itself is probably failing and needs service or replacement. Start with the cheap checks; the fuser is the last resort, not the first.
My SCX-4623F will not print after I changed the toner — should I reinstall the old one to test?
The SCX-4623F reads a small chip on the MLT-D105S, so anything blocking that contact — toner dust, a missed pull-tab — triggers an error. Reseating fixes the majority of cases: pull the cartridge out, inspect the slot for obstructions, and slide it back until it clicks. A careful reinstall beats a support call almost every time.
What causes thin vertical lines on pages from my SCX-4623F that will not go away after I wipe the paper path before I buy replacement parts?
Vertical lines and repeating marks almost always come from the drum or a dirty roller, not from low toner in the MLT-D105S. Measure the distance between repeating marks and compare it with the drum circumference noted in the SCX-4623F manual; a match confirms the drum. Knowing which roller is guilty turns a confusing defect into a one-part repair.