Two things decide how a Lexmark owner experiences a compatible cartridge, and neither is the toner. The first is the program the cartridge belongs to. Lexmark sells most cartridges two ways: as Return Program cartridges, discounted in exchange for a single-use agreement, and as Regular cartridges with no such terms. Lexmark states that a Return Program chip may not be reset or reused, and that a refilled Return Program cartridge counts as unauthorized; a Regular cartridge may be refilled as long as its original Lexmark chip is kept. The second is the message system: Lexmark’s guides split cartridge messages into the 32.xy family, a hard stop, and the 33.xy warning, which reports a non-Lexmark supply and then lets you accept it and keep printing — the guides describe holding the message, or a button combination, for 15 seconds to continue. Everything below hangs off those two facts.
THE FOURTEEN FAMILIES AT A GLANCE
Find your cartridge family here, then read its full section below. The yield column shows Lexmark's own ISO/IEC 19752 figure only where we captured it from a Lexmark page; a dash means Lexmark publishes a figure we could not capture, and we would rather leave the cell empty than fill it from a third party.
| Family · codes |
Printer models |
Lexmark yield |
What our product pages say about chips |
| 501 platform · 50F1H00 / 50F1X00 / 50F1U00 + Regular twins |
MS310, MS312, MS315, MS410, MS415, MS510, MS610 |
5,000 (501H tier) |
Parts-list mention on code-named listings; nothing on model-named ones |
| 511 · 51B00A0 |
MS317dn, MX317dn |
— |
Nothing |
| 521 platform · 52D1H00 / 52D1X00 |
MS710, MS711, MS810, MS811, MS812 |
— |
Parts-list mention on code-named listings; nothing on model-named ones |
| MS817 · 53B0HA0 |
MS817n |
— |
Nothing |
| 56F platform · 56F1000 / 56F1U00 |
MS321, MS421, MS521, MS621, MS622, MX321, MX521, MX522, MX622 |
6,000 / 25,000 (tiers sold) |
Nothing on 56F1000 listings; parts-list mention on 56F1U00 listings |
| 58D platform · 58D1H00 / 58D1X00 / 58D1U00 |
MS725, MS821–MS826, MX721, MX722, MX822, MX826 |
15,000 / 35,000 / 55,000 |
Nothing |
| 601 platform · 60F1H00 / 60F1X00 |
MX310, MX410, MX510, MX511, MX610, MX611 |
— |
Parts-list mention |
| 621 platform · 62D1H00 / 62D1X00 |
MX710, MX711, MX810, MX811, MX812, MX910–MX912 |
— |
Parts-list mention |
| T650 platform · T650A11A / T650H11A / T654X11A |
T650, T652, T654, T656 |
25,000 (T650H11A) |
Parts-list mention on A and X listings; nothing on T650H listings |
| T640 / X640 · X644H11A / 64435XA |
T640, T642, T644, X642, X644, X646 |
— |
Nothing on X644H listings; parts-list mention on 64435XA listings |
| E-series · 12A8305 / E260A11A / E260A21A / E450H21A |
E232–E342, E260, E360, E450, E460 |
— |
Parts-list mention |
| X203 / X264 · X203A11G / X264H11G |
X203, X204, X264, X363, X364 |
9,000 (X264H11G) |
Nothing on X203 listings; parts-list mention on X264 listings |
| Optra / T52x · 12A and 138 codes |
Optra 1120–1372, Optra S, T520, T522, T630–T634, X520–X634 |
— |
Parts-list mention on some listings; nothing on others |
| C746 black · C746H2KG |
C746, C748, X746, X748 (color printers) |
— |
Nothing |
Group A — the current MS and MX platforms
The eight families in this group run on Lexmark’s current monochrome platforms, and these are the machines Lexmark’s guides equip with the full cartridge message set — the 31.xy reseat message, the 32.xy unsupported-cartridge stop, the 33.xy warning with its 15-second override, the 41.xy mismatch and the 42.xy region mismatch. Over all of them sits the Firmware FAQ quoted in the header: protective measures that aim to disable the printer when an unauthorized cartridge is detected, maintained by updates, with no rollback offered. One honesty note applies to every section here: the FAQ speaks for Lexmark printers generally and names no families, and our product pages make no fitted-chip claim for any Lexmark cartridge — the sections below report exactly what our listings do say.
● Lexmark 501 platform · Chip check: documented · Our product pages: parts-list mention on some listings, silence on others — the family where our own descriptions explain the Return Program split — and where Lexmark’s message system is documented in full.
Cartridge numbers: 50F1H00 (501H, Return Program high yield) · 50F1X00 (501X, Return Program extra high) · 50F1U00 (501U, Return Program ultra) · 50F0XA0 and 50F0UA0 (the Regular, non–Return Program twins of the X and U tiers).
Rated yield (Lexmark, ISO/IEC 19752): the 501H tier is rated ~5,000 pages — Lexmark’s page for its Regular twin, the 500HA, declares a yield value of 5,000 standard pages. Lexmark figures for the X and U tiers were not captured, so none are printed here.
What Lexmark’s documentation says: this is the platform Lexmark’s MS310 user guide was written for, and that guide carries the full message set decoded below — including the note that a 32.xy stop can be triggered by a genuine Lexmark cartridge of the wrong yield tier. Over the whole platform sits the Firmware FAQ: protective measures aimed at disabling the printer when an unauthorized cartridge is detected, maintained by updates, and a Return Program chip that may not be reset or reused.
What our product pages say: two different readings, depending on which listing you land on. The code-named 501 listings carry a legacy sentence describing a cartridge built from all-new parts, a smart chip among them — a component list, not a claim about how the chip behaves. The 45 model-named listings carry no chip wording at all. Our 501H description is also the one place in our Lexmark range that explains the program split out loud: the 501H, 501X and 501U are Return Program cartridges, also sold as Regular cartridges under the 50F0HA0, 50F0XA0 and 50F0UA0 part numbers. What our descriptions do not state is which program core a Clever Supplies cartridge itself is built on.
Running cost on our shelf: at Lexmark’s 5,000-page rating, the 501H two-pack works out to about 1.04 cents per rated page, and the single to roughly 1.20 cents.
2-PACK · BEST VALUE
Compatible Lexmark 501H Toner Cartridge — 2-Pack
50F1H00 · ~5,000 pages per cartridge (Lexmark rating)
$103.52 SAVE $16.08 vs singles
View Product →
RETURN PROGRAM · HIGH YIELD
Compatible Lexmark 501H Toner Cartridge — Single
50F1H00 · ~5,000 pages (Lexmark rating)
$59.80
View Product →
● Lexmark 511 · Chip check: documented at brand level · Our product pages: no chip statement — the smallest family in this group — one code, two printers, and complete silence about chips on our side.
Printer family: Lexmark
MS317dn and
MX317dn — two printers, one cartridge.
Cartridge number: 51B00A0 (sold as the 511H in our category titles).
Rated yield: we could not capture a Lexmark figure for this code from a Lexmark page, so this section prints none rather than borrow one.
What Lexmark’s documentation says: the Firmware FAQ’s protective-measures statement covers Lexmark printers generally, and Lexmark’s support material for this model line treats the 32.xy code family as the sign of a non-genuine cartridge installed. The documented alternative outcome is the 33.xy warning path — accept the message, hold for 15 seconds, keep printing — and knowing which of the two your printer shows is the whole diagnosis.
What our product pages say: nothing about chips. All nine listings for this cartridge are model-named, and none of the nine carries any chip or firmware wording in either direction.
2-PACK · BEST VALUE
Compatible Lexmark MS317DN Toner Cartridge — 2-Pack
51B00A0 · for MS317dn and MX317dn
$112.22 SAVE $16.08 vs singles
View Product →
SINGLE CARTRIDGE
Compatible Lexmark MS317DN Toner Cartridge — Single
51B00A0 · for MS317dn and MX317dn
$64.15
View Product →
● Lexmark 521 platform · Chip check: documented · Our product pages: parts-list mention on some listings, silence on others — the high-volume workgroup platform — and the second family whose descriptions spell out the Return Program split.
Cartridge numbers: 52D1H00 (521H, Return Program high yield) · 52D1X00 (521X, Return Program extra high yield).
Rated yield: no Lexmark figure for either code was captured from a Lexmark page for this page, so no yield numbers are printed here — the comparison below is by price per cartridge.
What Lexmark’s documentation says: the MS710–MS812 machines sit in the platform generation whose Lexmark guides carry the 31/32/33/41/42 message set, and the Firmware FAQ’s protective measures are stated for Lexmark printers generally. Our 521H description records the program structure: the 521H and 521X are Return Program cartridges, also sold as Regular cartridges under part numbers 52D0HA0 and 52D0XA0 — which is why the Return Program explainer below matters to owners of these machines.
What our product pages say: the two code-named listings sets carry the legacy all-new-parts sentence, smart chip included in the component list. The 36 model-named 521H listings — the ones most buyers actually land on — carry no chip wording at all. As with the 501 family, our listings do not state whether a Clever Supplies cartridge is built on a Return Program or a Regular core.
2-PACK · BEST VALUE
Compatible Lexmark 521H Toner Cartridge — 2-Pack
52D1H00 · Return Program high yield
$173.43 SAVE $16.07 vs singles
View Product →
RETURN PROGRAM · HIGH YIELD
Compatible Lexmark 521H Toner Cartridge — Single
52D1H00 · Return Program high yield
$94.75
View Product →
● Lexmark MS817 · Chip check: documented at brand level · Our product pages: no chip statement — one printer, one cartridge, three listings — the simplest shelf in this group.
Printer family: Lexmark
MS817n — a single model, served by a single cartridge code.
Cartridge number: 53B0HA0 (our category title calls the family the 531H).
Rated yield: no Lexmark figure for this code was captured from a Lexmark page, so none is printed.
What Lexmark’s documentation says: the MS817n belongs to the same current MS generation as the 521 platform above: the Firmware FAQ’s protective measures are stated brand-wide, the platform’s guides carry the message set decoded below, and nothing in Lexmark’s published material exempts a single-model family from that framework.
What our product pages say: nothing about chips — none of the three listings for this cartridge carries chip or firmware wording.
2-PACK · BEST VALUE
Compatible Lexmark MS817N Toner Cartridge — 2-Pack
53B0HA0 · for the MS817n
$185.35 SAVE $16.09 vs singles
View Product →
SINGLE CARTRIDGE
Compatible Lexmark MS817N Toner Cartridge — Single
53B0HA0 · for the MS817n
$100.72
View Product →
● Lexmark 56F platform · Chip check: documented · Our product pages: silence on the standard tier, parts-list mention on the ultra — the family with a hole in the middle of its ladder — and the per-page math to prove why it matters.
Cartridge numbers: 56F1000 (standard) · 56F1U00 (ultra). Lexmark’s tier ladder for this platform also includes a 15,000-page high-yield tier and a 20,000-page extra-high tier — neither middle tier is on our shelf, and this page will not pretend otherwise.
Rated yields (Lexmark, ISO/IEC 19752): 56F1000 ~6,000 pages · 56F1U00 ~25,000 pages, from Lexmark’s own supply pages. Lexmark also sells region variants of these tiers under different part numbers — one reason the 42.xy region message in the decoder below exists.
What Lexmark’s documentation says: these are Return Program cartridges on Lexmark’s pages, which puts the FAQ’s chip rule at the center of the family: the security chip in a Return Program cartridge may not be reset or reused. The platform’s guides carry the full message set, including the region table in which region 1 is North America.
What our product pages say: the 21 listings for the standard cartridge are all model-named and chip-silent — no chip wording at all. The two ultra listings carry the legacy all-new-parts sentence with its smart-chip component mention. Same family, two readings, depending on the tier.
Running cost on our shelf, stated plainly: the standard cartridge is this family’s honest weak point. At Lexmark’s 6,000-page rating, the 56F1000 single works out to about 2.54 cents per rated page, the two-pack to roughly 2.40 cents. The ultra single, at 25,000 pages, works out to about 0.97 cents. Beyond occasional use, the ultra tier is where this family’s value sits — the missing middle tiers are exactly the ones that would have bridged the gap.
2-PACK · BEST VALUE
Compatible Lexmark 56F1000 Toner Cartridge — 2-Pack
56F1000 · ~6,000 pages per cartridge (Lexmark rating)
$288.17 SAVE $16.07 vs singles
View Product →
ULTRA HIGH YIELD
Compatible Lexmark 56F1U00 Toner Cartridge — Single
56F1U00 · ~25,000 pages (Lexmark rating)
$243.38
View Product →
● Lexmark 58D platform · Chip check: documented · Our product pages: no chip statement — the departmental heavy end of the current range — the biggest yields we sell under the Lexmark name.
Cartridge numbers: 58D1H00 (581H, Return Program high yield) · 58D1X00 (Return Program extra high) · 58D1U00 (Return Program ultra). There is no 7,500-page standard cartridge (58D1000) on our shelf — the ladder here starts at the high-yield tier — and the ultra tier is sold as singles only, with no multi-pack.
Rated yields (Lexmark, ISO/IEC 19752): 58D1H00 ~15,000 pages · 58D1X00 ~35,000 pages · 58D1U00 ~55,000 pages, from Lexmark’s own pages for the platform. Lexmark notes these printers ship with an 11,000-page Return Program starter cartridge, and rates the imaging unit at up to 150,000 pages — a separate supply we do not sell.
What Lexmark’s documentation says: Lexmark’s pages for this platform list the cartridges as Return Program parts, tier by tier, which brings the FAQ’s chip rule with them: a Return Program chip may not be reset or reused, and a refilled one is, in Lexmark’s definition, unauthorized. The platform’s guides carry the message set decoded below.
What our product pages say: nothing about chips. All 78 listings in this family — the largest current-platform family we carry — are model-named, and not one of them carries chip or firmware wording.
Running cost on our shelf: at Lexmark’s ratings, the 58D1H00 single works out to about 1.82 cents per rated page and its two-pack to roughly 1.77 cents; the extra-high single brings that to about 1.09 cents, and the ultra single to roughly 0.78 cents. On a platform built for volume, the higher tiers earn their price quickly.
2-PACK · BEST VALUE
Compatible Lexmark 58D1H00 Toner Cartridge — 2-Pack
58D1H00 · ~15,000 pages per cartridge (Lexmark rating)
$530.34 SAVE $16.08 vs singles
View Product →
RETURN PROGRAM · HIGH YIELD
Compatible Lexmark 58D1H00 Toner Cartridge — Single
58D1H00 · ~15,000 pages (Lexmark rating)
$273.21
View Product →
● Lexmark 601 platform · Chip check: documented · Our product pages: parts-list mention — the multifunction sibling of the 501 platform, sold under its own code set.
Cartridge numbers: 60F1H00 (601H) · 60F1X00 (601X) — this family exists in our catalog as code-named listings only.
Rated yield: no Lexmark figure for either code was captured from a Lexmark page, so this section prints none; the pack comparison below is by price per cartridge.
What Lexmark’s documentation says: these MX machines share their platform generation with the 501 family — our Regular-code 501 listings name these same MX models — and Lexmark’s guides for the platform carry the full message set, with the Firmware FAQ’s protective measures stated over the top of it.
What our product pages say: both code-named listing sets carry the legacy all-new-parts sentence, with the smart chip named in the component list. It is a description of what the cartridge is built from; it is not a statement that a chip is fitted for compatibility, and this page does not read it as one.
2-PACK · BEST VALUE
Compatible Lexmark 601H Toner Cartridge — 2-Pack
60F1H00 · for the MX310–MX611 lines
$125.33 SAVE $16.07 vs singles
View Product →
SINGLE CARTRIDGE
Compatible Lexmark 601H Toner Cartridge — Single
60F1H00 · for the MX310–MX611 lines
$70.70
View Product →
● Lexmark 621 platform · Chip check: documented · Our product pages: parts-list mention — the enterprise multifunction platform — with one catalog gap we would rather show you than hide.
Printer family: the MX710, MX711, MX810, MX811, MX812, MX910, MX911 and MX912 machine families, named here as plain text for a reason explained below.
Cartridge numbers: 62D1H00 (621H) · 62D1X00 (621X) — code-named listings only.
Rated yield: no Lexmark figure for either code was captured from a Lexmark page, so none is printed; compare by price per cartridge below.
What Lexmark’s documentation says: the MX710–MX912 machines belong to the same documented platform generation as the 521 family: Lexmark’s guides for the generation carry the 31/32/33/41/42 message set, and the Firmware FAQ states its protective measures for Lexmark printers generally.
What our product pages say: both code-named listing sets carry the legacy all-new-parts sentence with its smart-chip component mention — a parts list, not a fitted-chip claim.
One catalog fact, stated openly: these six listings currently sit in no category on our store at all — not even the Lexmark root — which is why the printer names above carry no links. The listings are reachable by search and by the cards below; the missing category assignment is our catalog gap, not a property of the cartridges.
Choosing between the packs: the 621H two-pack brings the per-cartridge price down from $94.75 to $86.72; the 621X single is $113.32.
2-PACK · BEST VALUE
Compatible Lexmark 621H Toner Cartridge — 2-Pack
62D1H00 · for the MX710–MX912 lines
$173.43 SAVE $16.07 vs singles
View Product →
SINGLE CARTRIDGE
Compatible Lexmark 621H Toner Cartridge — Single
62D1H00 · for the MX710–MX912 lines
$94.75
View Product →
Group B — the legacy platforms, and one black cartridge for color printers
The six families below run on older Lexmark platforms, and the documentation picture is genuinely different — stated plainly, not borrowed from Group A’s framing. No Lexmark document we read ties these older platforms to the disable-on-detection measures in the Firmware FAQ; that FAQ names no families, and the message evidence we captured belongs to the current platforms. What still applies here is the program layer: these families’ cartridges include Return Program variants, and Lexmark’s policy — a Return Program chip may not be reset or reused — is stated for its cartridges generally.
● Lexmark T650 platform · Older platform · Our product pages: parts-list mention on A and X listings, silence on H listings — the legacy workhorse — with a shelf pricing pattern every buyer should see before choosing a tier.
Cartridge numbers: T650A11A (standard) · T650H11A (high yield) · T654X11A (extra high, for the T654 and T656). The 11A suffix marks the Return Program versions in Lexmark’s numbering; the Regular twins carry 21A suffixes.
Rated yield (Lexmark, ISO/IEC 19752): the T650H11A is rated ~25,000 standard pages on Lexmark’s own cartridge page. Lexmark figures for the standard and extra-high codes were not captured for this page.
What our product pages say: the standard and extra-high listing sets carry the legacy all-new-parts sentence, smart chip in the component list. The high-yield listings — all 48 of them, and the ones most buyers land on — carry no chip wording whatsoever.
One honest buyer note: on our shelf today, the standard-yield single is priced exactly the same as the high-yield single, and the extra-high single for the T654 and T656 costs less than both. The arithmetic for a buyer is simple: at the same money, take the high-yield cartridge; if your machine is a T654 or T656, the extra-high single is the rational buy of the three.
Running cost on our shelf: at Lexmark’s 25,000-page rating, the high-yield two-pack works out to about 0.56 cents per rated page, and the single to roughly 0.59 cents.
2-PACK · BEST VALUE
Compatible Lexmark T650H11A Toner Cartridge — 2-Pack
T650H11A · ~25,000 pages per cartridge (Lexmark rating)
$279.05 SAVE $16.08 vs singles
View Product →
HIGH YIELD
Compatible Lexmark T650H11A Toner Cartridge — Single
T650H11A · ~25,000 pages (Lexmark rating)
$147.56
View Product →
● Lexmark T640 / X640 platform · Older platform · Our product pages: silence on X644H listings, parts-list mention on 64435XA listings — one cartridge code doing double duty across a printer line and a multifunction line.
Cartridge numbers: X644H11A (high yield — one cartridge serving both the T64x printers and the X64x multifunction machines) · 64435XA (extra high, sold under T644-named listings).
Rated yield: no Lexmark figure for either code was captured from a Lexmark page, so none is printed; compare by price per cartridge.
What Lexmark’s documentation says: nothing captured in our reading ties this platform to the Firmware FAQ’s disable-on-detection measures. The cartridge numbering still carries the program layer: the 11A suffix is the Return Program form, and Lexmark’s statement that a Return Program chip may not be reset or reused applies to the cartridge whatever the printer’s age.
What our product pages say: split by code. The 51 model-named X644H listings carry no chip wording at all; the extra-high listing set carries the legacy all-new-parts sentence with its smart-chip component mention.
2-PACK · BEST VALUE
Compatible Lexmark X644H11A Toner Cartridge — 2-Pack
X644H11A · fits T640–T644 and X642–X646
$287.54 SAVE $16.08 vs singles
View Product →
HIGH YIELD
Compatible Lexmark X644H11A Toner Cartridge — Single
X644H11A · fits T640–T644 and X642–X646
$151.81
View Product →
● Lexmark E-series · Older platforms · Our product pages: parts-list mention — the small-office legacy line — and the one family where both program versions sit on the shelf together.
Cartridge numbers: 12A8305 (the E232-era code) · E260A11A (Return Program) · E260A21A (Regular) · E450H21A (E450 high yield, Regular-suffix).
Rated yield: no Lexmark figure for any of these legacy codes was captured from a Lexmark page, so this section prints none.
What Lexmark’s documentation says: no document we read ties these small-workgroup platforms to the disable-on-detection measures. The E260 is, however, the clearest small-scale illustration of the program system on this page: Lexmark sold the same cartridge as a Return Program part (the 11A code) and as a Regular part (the 21A code), and everything in the explainer below — reset, reuse, refill — turns on which of those two a given cartridge is.
What our product pages say: all four listing sets carry the legacy all-new-parts sentence with the smart-chip component mention.
REGULAR CARTRIDGE · SINGLE
Compatible Lexmark E260 Toner Cartridge — Single
E260A21A · the Regular (non–Return Program) version
$92.19
View Product →
HIGH YIELD
Compatible Lexmark E450 Toner Cartridge — Single
E450H21A · for the E450 line
$132.53
View Product →
● Lexmark X203 / X264 · Older platform · Our product pages: silence on X203 listings, parts-list mention on X264 listings — the small multifunction line, where the high-yield cartridge undercuts the standard one.
Cartridge numbers: X203A11G (for the X203 and X204) · X264H11G (high yield, for the X264, X363 and X364). The G suffix marks the Return Program family on Lexmark’s own page for the high-yield code.
Rated yield (Lexmark, ISO/IEC 19752): the X264H11G is rated ~9,000 standard pages on Lexmark’s cartridge page. No Lexmark figure for the X203 code was captured, so none is printed for it.
What Lexmark’s documentation says: as with the other legacy groups, no document we read ties these multifunction platforms to the disable-on-detection measures; the Return Program status of the cartridges themselves is documented, and the FAQ’s chip rule follows the cartridge.
What our product pages say: the nine X203 listings are model-named and chip-silent. The high-yield listing set carries the legacy all-new-parts sentence, smart chip in the component list.
Running cost on our shelf: at Lexmark’s 9,000-page rating, the X264H single works out to about 0.76 cents per rated page — and it is priced a touch below the X203 single, which makes the high-yield cartridge the straightforward choice wherever your machine takes it.
2-PACK · BEST VALUE
Compatible Lexmark X203 Toner Cartridge — 2-Pack
X203A11G · for the X203 and X204
$122.77 SAVE $16.07 vs singles
View Product →
HIGH YIELD
Compatible Lexmark X264 Toner Cartridge — Single
X264H11G · ~9,000 pages (Lexmark rating)
$68.53
View Product →
● Lexmark Optra / T52x legacy · Oldest platforms · Our product pages: parts-list mention on some codes, silence on others — the deepest legacy bench we carry — kept in print here because these machines are still in service.
Cartridge numbers: 12A6735 (T520) · 12A6835 · 12A6865 · 12A7365 · 1382625 and 1382925 (the Optra S codes).
Rated yield: no Lexmark figure for any of these legacy codes was captured from a Lexmark page, so this section prints none rather than repeat numbers we could not source to Lexmark.
What Lexmark’s documentation says: these platforms predate the documentation era this page draws on, and nothing we read ties them to the Firmware FAQ’s protective measures. For machines of this age the practical question is fit, and that is answered by the cartridge code on your old unit — match it exactly, because this family’s codes cover several distinct cartridge shapes across the Optra generations.
What our product pages say: mixed, code by code. The 12A6735, 12A7365 and 1382625 listing sets carry the legacy all-new-parts sentence; the 12A6835, 12A6865 and 24 model-named 1382925 listings carry no chip wording at all. On platforms this old, treat that sentence for what it is — a component description in a legacy template, not a compatibility promise.
SINGLE CARTRIDGE
Compatible Lexmark T520 Toner Cartridge — Single
12A6735 · for the T520 line
$147.56
View Product →
OPTRA S FAMILY
Compatible Lexmark Optra 4059 Toner Cartridge — Single
1382925 · for the Optra S line
$95.16
View Product →
● Lexmark C746 black · For color printers · Our product pages: no chip statement — a section of its own, flagged for what it is: the black cartridge for Lexmark color printers.
Cartridge number: C746H2KG — black. Only black.
Rated yield: no Lexmark figure for this code was captured from a Lexmark page. Color-printer cartridges carry yields declared under a different ISO standard on Lexmark’s pages, and we will not borrow a number across that line.
What Lexmark’s documentation says: no Lexmark document captured for this page addresses the C74x platform in connection with firmware or cartridge blocking, and this section claims none.
What our product pages say: nothing about chips — all 27 listings are model-named and chip-silent.
The honest headline for this section: our Lexmark shelf for these color printers is this one black cartridge and nothing else — we sell no cyan, magenta or yellow cartridges for the C746, C748, X746 or X748, here or anywhere else in the store. If your machine needs color, this page cannot help you, and it would rather say that in one sentence than let a black cartridge imply a color range that does not exist.
2-PACK · BEST VALUE
Compatible Lexmark C746 Black Toner Cartridge — 2-Pack
C746H2KG · black, for Lexmark color printers
$151.56 SAVE $16.08 vs singles
View Product →
BLACK · SINGLE
Compatible Lexmark C746 Black Toner Cartridge — Single
C746H2KG · black, for Lexmark color printers
$83.82
View Product →
Return Program vs Regular — the distinction that runs this page
In Lexmark’s own words, Return Program cartridges are “patented print cartridges sold at a discount in exchange for the customer’s agreement to the license requirement that the cartridges will be used only once and returned only to Lexmark for remanufacturing or recycling.” The Firmware FAQ adds the mechanical consequence: “the security chip in these cartridges may not be reset or reused,” the cartridges stop working at the end of their rated life, and they may update the printer’s memory to protect it from counterfeit or unauthorized products. Regular cartridges carry none of those terms: Lexmark states they may be refilled and remanufactured as long as the original Lexmark chip is kept, and can also be recycled free through the Lexmark Cartridge Collection Program.
That is also what the word unauthorized means in Lexmark’s vocabulary. The FAQ defines it to include refilled or remanufactured Return Program cartridges, counterfeit cartridges, and unauthorized compatible cartridges that violate Lexmark’s intellectual property rights or are otherwise unlawful. Read that carefully and the center of the system becomes clear: what the protective measures are built to catch is, above all, a Return Program cartridge that has been refilled and put back into circulation.
What does that mean for the cartridges on this page? One statement, made plainly: our listings do not state which program core a compatible cartridge is built on. The 501 and 521 descriptions explain the split because the genuine cartridges come both ways; no Clever Supplies listing claims to be one or the other. What matters to you follows from Lexmark’s definitions — a cartridge whose history involves a refilled Return Program core is the thing the system targets. Ask us, and we will tell you what we know and what we do not.
What message do you see?
Lexmark’s user guides document a small, precise message vocabulary. The first two letters of the code tell you which conversation you are in: 32 is a stop, 33 is a warning you can accept, and 31, 41 and 42 are fit problems with specific causes. Match your screen to the closest card — and photograph the exact wording first, because the code is the diagnosis.
“Replace unsupported cartridge [32.xy]”
The hard stop. Lexmark’s MS310 guide gives the whole instruction: remove the toner cartridge and install a supported one. Two things owners miss. First, Lexmark’s own note says this error can also be caused by a genuine Lexmark cartridge — its example is a high-yield cartridge — not intended for use with that product, so the message is not proof a cartridge is fake. Second, Lexmark support articles also document codes such as 32.52 for a non-genuine or defective cartridge. First step: verify the code and tier against your model before condemning anything.
The 32.13–32.37 code list
Lexmark’s guides name the specific codes that indicate a non-genuine Lexmark toner cartridge is installed: 32.13, 32.16, 32.19, 32.22, 32.25, 32.28, 32.31, 32.34 and 32.37. If your screen shows one of these, the printer is not asking about toner level or seating — it has made a determination about the cartridge itself. First step: photograph the code, then talk to the seller with the photo in hand.
“Reinstall missing or unresponsive cartridge [31.xy]”
The printer cannot get an answer from the cartridge at all. Lexmark’s guide directs you to remove and reinstall it and, if the message persists, to inspect the contacts — adding that the cartridge may be defective or a non-genuine Lexmark supply. First step: one careful reseat and a contact inspection; this is the one chip-adjacent message that is often physical.
“Non-Lexmark supply [33.xy]”
The warning path — the printer has detected a non-Lexmark supply and is asking you to decide. Lexmark’s guides describe the override exactly: on touchscreen models, touch and hold the error message with two fingers for 15 seconds, then touch Continue when the confirmation appears; on button models, hold the documented combination for 15 seconds. Accepting means accepting the stated risks, and Lexmark warns that supply functions such as low alerts may not work correctly afterward. If it still will not print after clearing, the guide directs you to reset the supply usage counters in the maintenance menu.
“Cartridge, imaging unit mismatch [41.xy]”
A pairing problem, not a verdict on either part alone: cartridge and imaging unit are not from the same manufacturer, or not both Lexmark — the guide’s instruction is to use only Lexmark supplies designed for the printer. First step: identify which of the two supplies is the odd one out before replacing either; owners routinely buy a second cartridge when the mismatch was the unit.
“Replace cartridge, printer region mismatch [42.xy]”
The cartridge was made for a different part of the world. Lexmark designs cartridges for a specific geographical region, and the code names both: in Lexmark’s table, region 1 is North America (the United States and Canada, with Australia and New Zealand), 2 is the EEA and its neighbors, 0 is worldwide and 9 is invalid. First step: check the cartridge’s region against the printer’s — a cartridge from an overseas listing can be genuine and still be wrong.
“Refilled regular cartridge”
The informational one. The printer has detected a Lexmark Regular cartridge refilled with non-genuine toner by someone other than Lexmark — and the documented response is to select OK and continue. Note the contrast Lexmark builds in: a refilled Regular cartridge gets a notice; a refilled Return Program cartridge is, by the FAQ’s definition, unauthorized. Same refill, different program, opposite treatment.
Imaging-unit and low-supply messages [84.xy] / [88.xy]
The routine end-of-life vocabulary: replace-imaging-unit and imaging-unit-low under 84.xy; cartridge low, very low and nearly low under 88.xy. These are clocks, not chip disputes — but Lexmark’s guides warn that supply-level reporting may not work correctly with a non-genuine supply accepted through the 33.xy path, so an untrustworthy level reading is a known side effect, not a second fault.
Before you update a Lexmark printer’s firmware — read this first
The fact that governs everything below: Lexmark states it will not roll a firmware update back, and that a printer cannot be exchanged because of an update. An update on this brand is a one-way door, so walk through it deliberately.
☐ Record the firmware version your printer is running today, before anything changes — if a cartridge behaves differently afterward, the version is the first fact anyone will ask for
☐ Know which group your family sits in on this page — the current MS/MX platforms carry the documented message set; the legacy platforms do not, and the caution level should match
☐ Expect the update to maintain the protective measures, not relax them — Lexmark’s FAQ says updates may do exactly that, including against cartridges that previously worked
☐ Leave the current cartridge installed and printing until the update is done and a test page has run — never change the cartridge and the firmware in the same hour
☐ If a cartridge message appears afterward, photograph the screen with the code visible before you touch anything
Questions, answered straight
Does Lexmark block third-party cartridges?
By its own published account, its printers are built to. The Firmware FAQ states that Lexmark’s protective measures “aim to disable the printer if a counterfeited or unauthorized third-party cartridge is detected,” and that updates maintain those measures — during an update “the printer may be disabled if counterfeited or unauthorized third-party cartridges are detected, including those that previously worked.” The FAQ names no families; the model-level documentation we captured is strongest for the current MS/MX platforms in Group A. We have not softened that wording anywhere on this page, and you should be wary of any seller who does.
What is a Return Program cartridge, and why does it matter so much?
It is a pricing agreement built into a cartridge. Lexmark sells it at a discount in exchange for your agreement to use it once and return it to Lexmark. The mechanical consequence, in Lexmark’s words, is that “the security chip in these cartridges may not be reset or reused,” and a refilled Return Program cartridge counts as unauthorized. A Regular cartridge is the opposite arrangement: no discount, no single-use terms, and refilling is permitted as long as the original Lexmark chip is kept. The program encoded in a cartridge’s part number decides which rules its chip lives under.
What is the difference between a 32.xy and a 33.xy message?
Outcome. A 32.xy message is a stop: Lexmark’s guides name specific 32 codes — 32.13 through 32.37 in steps — as indicating a non-genuine cartridge. A 33.xy message is a warning with a documented exit: the printer reports a non-Lexmark supply, and the guides describe holding the message, or a button combination, for 15 seconds and touching Continue to accept the risks and keep printing. If you remember one distinction from this page, make it that one.
Can I roll back a firmware update if a cartridge stops working afterward?
No — and that is Lexmark’s answer, not ours. The Firmware FAQ states that Lexmark will not roll firmware back to an earlier version, and that a printer cannot be exchanged because of an update. That single fact is why the checklist above exists: on this brand, the time to think about an update is before it is applied.
My cartridge is a genuine Lexmark cartridge, and the printer still showed 32.xy. How?
Lexmark’s own guide anticipates the question: the MS310 user guide notes that the unsupported-cartridge error can also be caused by a genuine Lexmark cartridge not intended for use with that product — its example is a high-yield cartridge in a machine that does not take that tier. A cartridge built for a different region produces the related 42.xy mismatch. Genuine is not the same as correct: tier and region both have to match the machine.
Do your Lexmark cartridges claim a special chip?
No, and this page exists partly to keep that answer honest. Across our Lexmark range, our product pages do exactly two things: some carry a legacy sentence listing a smart chip among a cartridge’s all-new components, and the rest say nothing about chips at all. No Clever Supplies Lexmark listing claims a fitted compatibility chip or firmware resistance — and where a section above says “parts-list mention,” that sentence is all it means. What we stand behind is the cartridge itself and the warranty behind it, not a chip claim we never made.
Our disclosure: we sell compatible toner and benefit when you buy through this page. Prices shown were read from our product pages on November 11, 2026 and can change; the product page is always the final word. Page yields are Lexmark’s ISO/IEC 19752 figures where Lexmark publishes them; where we could not capture a Lexmark figure for a family, the yield is omitted rather than filled in from third parties, and the section says so. Lexmark’s chip and firmware statements are Lexmark’s own published wording, quoted or closely paraphrased from its Firmware FAQ, its Return Program pages and its user guides; the Firmware FAQ speaks for Lexmark printers generally and names no families, and this page does not present it as family-specific. What our listings say about chips is reported per family exactly as found — a parts-list mention on some listings, silence on the rest — and neither has been upgraded into a fitted-chip claim. Questions we haven’t covered: contact us Monday to Friday, 9 AM to 5 PM CST.