HP LaserJet M201DW Toner Cartridges

LaserJet M201DW

Duplex plus wireless made the LaserJet M201DW the flexible M201: two-sided monochrome printing without cables, for modern small offices. Its standard cartridge is the CF283A, and the high-yield CF283X stretches the interval between changes. Below, the 83A runs from a single cartridge to a 10-pack with MICR versions, and the 83X comes in a listing named for this model.

A wireless printer tends to migrate — it lands wherever the work is, from a front desk to a home office corner. That freedom goes better with a cartridge you rarely think about, and with the same cartridge family as the wired machines around it: this model shares its toner with the M125, M127 and M225 lines, so one shelf stock can quietly cover a whole small fleet.

Toner Cartridges for LaserJet M201DW

Cartridge	Color	Page Yield
CF283A single cartridge	Black	See product page
CF283A 2-pack	Black	See product page
CF283A 3-pack	Black	See product page
CF283A 5-pack	Black	See product page
CF283A 10-pack	Black	See product page
CF283X high-yield single, M201DW listing	Black	See product page

For offices that print checks on this machine, the MICR versions of the standard cartridge:

Listings named for the family's other machines are carried on this page too: M127 listing, M127FN listing, M127W listing, M201N-MICR listing, M125-MICR listing, M125NW-MICR listing, M127-MICR listing, M127FN-MICR listing, M127W-MICR listing, M201-MICR listing, M225-MICR listing, M201N listing, M125 listing, M125NW listing, M201 listing, M225 listing.

Which cartridge should you buy?

Wireless convenience pairs naturally with the high-yield cartridge: fewer changes, and the printer stays where it was put instead of being opened up every few weeks. Lighter users lose nothing with the standard cartridge — it is the same fit and the same print, just a smaller fill. Packs of either yield make sense when the same cartridge also feeds other machines in the office. MICR remains a check-only choice.

Chip, toner and everyday use

Before fitting a new cartridge, give it a gentle side-to-side rock so the toner sits level, keep it flat, and avoid touching the roller surface. Pull the seal out fully, slide the cartridge in until it seats, and let the printer recognize the chip before sending a job. If recognition fails, reseat the cartridge and power the printer off and on so it detects it again. Store the spare sealed, away from sunlight through office windows.

Frequently Asked Questions

What toner cartridge does the LaserJet M201DW use?

The CF283A standard cartridge, or the high-yield CF283X when you want longer runs between changes. Both are listed on this page.

Should I shake a new cartridge before installing it?

A gentle rock, yes — never a hard shake. Levelling the toner inside gives even coverage from the first page; keep the cartridge level and hands off the roller.

Why does my M201DW not recognize the new cartridge?

Usually a seating or seal issue: reseat the CF283A firmly, check that every protective strip was removed, and restart the printer so it re-detects the chip.