ImageClass MF733Cdw

Fax earns its place back on the imageCLASS MF733Cdw, which pairs Super G3 fax with Canon's Application Library, one-touch buttons that store the steps of repeated jobs, on a 28-ppm color MFP with automatic duplexing and standard networking. Its toner is the Canon 046H high-yield family, black at 6,300 pages and the 046HC cyan, 046HM magenta and 046HY yellow cartridges at 5,000 pages each. The standard 046 family also fits, rating black at 2,200 pages and its colors at 2,300 pages apiece.
Two kinds of office keep this model busy. The first still receives real work by fax: orders, signed forms, referrals. The second runs the same jobs every week, and that is where the Application Library earns its keep, because a multi-step scan-and-send or copy routine collapses into a single button press for whoever walks up. Around those two pillars sits the complete color MFP formula at full speed, so the MF733Cdw asks nobody to choose between the classic office and the modern one. It is the everything-included configuration of its line.
Toner Cartridges for ImageClass MF733Cdw
Black packs come first, since fax and text work lean on that slot, then singles, sets and the standard tier.
Which cartridge should you buy?
Think about what prints. Received faxes and everyday documents draw on the black cartridge almost exclusively, which is why this page leads with black packs: a high-yield black rated at 6,300 pages stretches the interval between swaps, and a 2-pack or 3-pack keeps the next one already in the building. Colors serve printing and copying, empty independently and should be replaced as singles when their turn comes; the high-yield colors at 5,000 pages suit offices whose color output is a weekly habit. The standard tier, 2,200 pages in black and 2,300 in color, is the economy fill for a machine in a genuinely quiet corner. Keep one full spare set only if downtime is unacceptable; otherwise a spare black plus the color that warns next is the efficient shelf.
Chip, toner and everyday use
One-touch jobs make toner discipline more important, not less: a stored workflow that stops halfway for an empty cartridge wastes the time it was created to save. Check the per-slot levels the chips report before launching a long stored job, and treat the readings as estimates that assume standard page coverage. When a cartridge fades, a gentle rock from side to side levels the toner and usually restores clean output long enough to finish the run. Fit replacements one slot at a time, let each new chip register, and keep unopened cartridges boxed in a cool place. A spare black stored near the machine is the single most useful habit on a fax-equipped MFP.
Frequently Asked Questions
What is the Application Library on the MF733Cdw?
It is Canon's one-touch workflow system: the steps of a repeated job, such as scanning a form to a fixed destination with fixed settings, are stored behind a single button on the panel. Anyone can then run the job correctly without re-entering the settings each time.
How is the MF733Cdw different from the MF731Cdw?
The ImageClass MF731Cdw is the three-in-one model with print, copy and scan. The MF733Cdw adds Super G3 fax and the Application Library on top of the same 28-ppm platform, and both machines use the same cartridge families listed here.
What yields do the cartridges for this model carry?
In the high-yield 046H line, black is rated at 6,300 pages and each color at 5,000 pages. In the standard 046 line, black is rated at 2,200 pages and the colors at 2,300 pages each, all at standard 5% coverage.
Do received faxes use the color cartridges?
No. Incoming faxes print from the black slot, so fax traffic shortens the black cartridge's life while leaving the colors untouched. That is why fax-heavy offices feel black cartridge purchases most, and why the black packs lead this page.
More printers that use the same cartridges
These models draw on the same two cartridge tiers: ImageClass MF731Cdw, ImageClass LBP654Cdw, ImageClass MF735Cdw, ImageClass LBP654Cfw.
