LaserJet Pro 400 Printer M401A

The LaserJet Pro 400 Printer M401A is the starting point of the Pro 400 line: a straightforward monochrome laser for desks and small workgroups that keeps everyday black-and-white printing uncomplicated. Its supply shelf is the HP 80A range in standard form and the HP 80X in high-yield form. Ordered by their full part numbers, the standard cartridge is the CF280A, the longer-running option is the CF280X, and compatible makers extend the ladder further with a jumbo CF280XJ (80XJ) and a maximum-yield CF280XX (80XX). Four fills, one slot — the M401A never asks you to learn a second cartridge.
As the base configuration, the M401A suits the single desk or the small team that prints letters, invoices and reports without needing the line's extra hardware. Its appeal is discipline: a compact mono engine, one black cartridge family, and running costs you can predict from the yield tier you pick. Owners who print a modest weekly stack usually find the standard fill sufficient, while busier desks step up a tier rather than change machines.
Toner Cartridges for LaserJet Pro 400 Printer M401A
| Cartridge | Color | Page Yield |
|---|---|---|
| CF280A standard-yield black | Black | See product page |
| CF280A MICR black, for check printing | Black | See product page |
| CF280A black, 3 pack | Black | See product page |
| CF280A Premium black, 3 pack | Black | See product page |
| CF280X high-yield black | Black | See product page |
| CF280X high-yield MICR black | Black | See product page |
| CF280X high-yield black, 3 pack | Black | See product page |
| CF280X high-yield black, 5 pack | Black | See product page |
| CF280XJ jumbo-yield black | Black | See product page |
| CF280XX maximum-yield black | Black | See product page |
| CF280XX maximum-yield black, 3 pack | Black | See product page |
Which cartridge should you buy?
Start with the CF280A standard single if your printing comes in small, irregular batches; it is the cheapest way into the slot and ideal for a lightly used desk. The CF280X high-yield single stretches each change further, and its 3 pack and 5 pack suit offices that would rather hold stock than reorder. Above that, the CF280XJ jumbo and CF280XX maximum-yield singles cut changeovers to a minimum — the maximum also comes as a 3 pack for heavy months. Check-printing desks should look at the MICR builds of the standard and high-yield cartridges, which use magnetic toner for checks; the Premium 3 pack is the uprated standard-fill alternative. Whichever tier you choose, every cartridge on this page is backed by a 1-year warranty and 1-year returns.
Chip, toner and everyday use
Each cartridge carries a chip the M401A reads on installation, so seat the unit firmly until it clicks and close the door before printing a test page. Pull the sealing tape fully out of a fresh cartridge and give it a gentle side-to-side rock first, which levels the toner for even first pages. Yield figures follow the usual 5% coverage estimate, so dense documents finish a fill sooner than letters do. Keep a spare sealed on a shelf away from heat and light, and when output fades near the end of a fill, rocking the cartridge buys extra pages while the replacement ships.
Frequently Asked Questions
What toner does the LaserJet Pro 400 Printer M401A take?
It takes the HP 80A family: the CF280A as the standard fill, the CF280X when you want a high-yield fill, and the compatible CF280XJ jumbo or CF280XX maximum-yield builds above those. All four fit the same slot, so the choice is about how often you want to change cartridges.
Is there a MICR option for the M401A?
Yes. Both the standard CF280A and the high-yield CF280X are stocked in MICR form, with magnetic toner formulated for printing checks. Pick the MICR build that matches the yield tier you normally run.
Why does the M401A show a low-toner message while pages still look fine?
The printer estimates remaining toner conservatively, and solid pages often continue well past the first warning. Order the next cartridge when the alert appears, keep printing, and swap when density actually drops.
Can I run the M401A on a cartridge bought for an M425?
Yes — the M425 multifunction models draw from the same 80A family listed on this page, so a CF280A or CF280X bought for one machine fits the other. Always confirm the code on the cartridge label before installing.
More printers that use the same cartridges
The same 80A family also feeds these Pro 400 models: HP CF280A, LaserJet M401, LaserJet M401A, LaserJet M401D, LaserJet M401DN, LaserJet M401DNE, LaserJet M401DW, LaserJet M401N, LaserJet M401a, LaserJet M401dw,LaserJet M401n, LaserJet M425, LaserJet M425DN, LaserJet M425DW, LaserJet M425dn MFP, LaserJet PRO 400 M401A, LaserJet Pro 400 M401, LaserJet Pro 400 M401D, LaserJet Pro 400 M401DW, LaserJet Pro 400 M401N, LaserJet Pro 400 M425DW, LaserJet Pro 400 MFP M425DN, LaserJet Pro 400 Printer M401D, LaserJet Pro 400 Printer M401DN, LaserJet Pro 400 Printer M401DNE, LaserJet Pro 400 Printer M401DW, LaserJet Pro 400 Printer M401N, LaserJet Pro 400 Printer M401S, Laserjet Pro 400 M401DN, Laserjet Pro 400 M401DNE, Laserjet Pro 400 M425, Laserjet Pro 400 MFP M425, Laserjet Pro 400 MFP M425DW, Laserjet Pro 400 PRINTER M401.
