null

0

Your cart is empty

LaserJet Pro 400 M401DW

LaserJet Pro 400 M401DW printer

Cable-free placement is the point of the LaserJet Pro 400 M401DW: wireless networking plus automatic duplexing, so the printer can live wherever the small office has space rather than wherever the router sits. It accepts the standard CF280A cartridge — HP's 80A — or the high-yield CF280X, its 80X sibling. Owners who rarely want to think about toner can climb to the family's extended compatible builds, the jumbo CF280XJ (80XJ) or the maximum-yield CF280XX (80XX).

Wireless printers wander. A DW unit might start life beside one desk, move to a shelf when the team grows, and end up serving a meeting room — all without needing a network drop. That mobility argues for the longer fills: the cartridge you install should outlast the printer's next relocation, and a spare in the drawer beside it matters more than a spare in a supply closet down the hall.

Toner Cartridges for LaserJet Pro 400 M401DW

The complete shelf for the M401DW, high-yield fills first:

CartridgeColorPage Yield
CF280X — high-yield single cartridgeBlackSee product page
CF280X MICR — high-yield MICR singleBlackSee product page
CF280X 3 Pack — high-yield three packBlackSee product page
CF280X 5 Pack — high-yield five packBlackSee product page
CF280A — standard-yield single cartridgeBlackSee product page
CF280A MICR — MICR single for check printingBlackSee product page
CF280A 3 Pack — standard-yield three packBlackSee product page
CF280A Premium 3 Pack — premium standard-yield three packBlackSee product page
CF280XJ — jumbo-yield single cartridgeBlackSee product page
CF280XX — maximum-yield single cartridgeBlackSee product page
CF280XX 3 Pack — maximum-yield three packBlackSee product page

Which cartridge should you buy?

Think about where the printer sits, not just how much it prints. A DW on a shared shelf across the room argues for fewer trips: the high-yield CF280X over the standard CF280A, or the jumbo CF280XJ if the walk is long and the volume steady. A desk-side DW with light output is fine on the standard fill, with the 3 pack kept as the drawer spare. The maximum CF280XX is the set-and-forget choice for a printer serving a meeting room or a front desk. MICR versions print checks; everyone else can safely ignore them.

Chip, toner and everyday use

Wireless setup and cartridge setup are separate worlds on the DW: the toner chip talks to the printer, not to the network, so a cartridge swap never disturbs the wireless link or the machine's address. Seat the fill until it stops, close up, and the printer recognizes it on its own. Fading output on a recently moved printer is often just settled toner — remove the cartridge, rock it slowly five or six times from end to end, and reinstall. Keep the spare where the printer currently lives, not where it used to; relocated machines have a way of running empty far from the supply shelf.

Frequently Asked Questions

Will moving the M401DW to another room affect its cartridge?

No. The cartridge travels with the printer and its chip is read internally; the wireless setup is stored separately and survives both relocations and toner swaps untouched.

Which fill suits a printer that serves a whole room?

Start at the high-yield CF280X rather than the standard CF280A. Room-serving printers empty faster than expected, and the jumbo CF280XJ or the maximum CF280XX pushes the change interval out further still.

Does this model use a separate drum unit?

No. The imaging drum is integrated into each cartridge, so replacing the toner replaces the drum as well — nothing else is consumed as the printer works.

Why did output fade after the printer was relocated?

Toner settles during a move. Take the cartridge out, rock it gently end to end a few times to level the powder, and reinstall — density usually returns without spending a new fill.

More printers that use the same cartridges

The DW's relatives share its toner shelf exactly; the complete family list follows.

SELECT YOUR PRINTER FAMILY TO SHOP LaserJet Pro 400 M401DW PRODUCTS