null

0

Your cart is empty

ALTALINK

The Xerox AltaLink series brings together five color model lines — AltaLink C8030, AltaLink C8035, AltaLink C8045, AltaLink C8055 and AltaLink C8070 — and cartridges in this series are grouped by model family rather than by the AltaLink name alone. The representative listings on this page are the C8030 set of four: black 006R01697, cyan 006R01698, magenta 006R01699 and yellow 006R01700. Each of the other four models has its own category page, and that page is where its matched cartridges are listed.

Thirty-six listings sit under the AltaLink name in our catalog, spread across those five models, and that spread is exactly why this page works as a series map. Most buyers arrive knowing the series — AltaLink is the name on the machine, in the manual and on the supply order — while the cartridge code belongs to the full model number that follows it. Two offices can both run AltaLink machines side by side and still need different cartridges, because a C8030 and a C8070 do not draw from the same shelf. Start here to get your bearings, then let the model number, not the series name, make the final decision.

Popular cartridges for AltaLink

CartridgeColor / TypePage Yield
006R01697BlackSee product page
006R01698CyanSee product page
006R01699MagentaSee product page
006R01700YellowSee product page

Which cartridge should you buy?

Begin with the complete model number on your machine. If it reads C8030, the four cartridges in the table above are your set, and they are bought independently: black runs on its own cycle and typically empties ahead of the colors in everyday office printing, while each color is replaced only when that color runs low, so there is no reason to change all four at once. If your number is C8035, C8045, C8055 or C8070, follow the directory below to that model's page and match the code printed on the cartridge you remove against the listings there — that code, checked digit for digit, is the surest way to order the right part the first time.

Chip, toner and everyday use

Every cartridge in this series carries a chip that tells the machine which color is installed and how much toner remains, so a new cartridge should click fully into its slot and register without forcing. Keep one spare of each color your office uses most, stored upright in a cool, dry place away from direct light, and rotate stock so the oldest box is opened first. Page yields quoted on the product pages are estimates measured at 5% page coverage, and dense color documents will finish a cartridge sooner than that figure suggests. Every compatible cartridge on this page is backed by a 1-year warranty and 1-year returns.

Frequently Asked Questions

Do all AltaLink printers use the same cartridges?

No. Cartridge codes in this series follow the model family, not the AltaLink name by itself. The four listings in the table are the C8030 cartridges; the C8035, C8045, C8055 and C8070 each have their own pages and their own listings, so always shop from the page that matches the full model number on your machine.

Which cartridge is the black for the AltaLink C8030?

The black listing for the C8030 is 006R01697, shown in the first row of the table. Cyan, magenta and yellow for the same machine are 006R01698, 006R01699 and 006R01700 respectively, and each one is ordered and replaced on its own.

One color on my AltaLink is empty. Do I replace all four?

No — replace only the color the machine reports as empty. The four cartridges are separate units with separate chips and separate toner supplies, and changing a color that still has toner left simply discards the pages remaining in it.

How do I confirm which AltaLink model I have?

Look for the full model number on the machine's rating label or in its device information screens, and note the complete C80xx number rather than just the AltaLink name. That number decides which category page — and which cartridge codes — apply to your machine.

AltaLink models

SELECT YOUR PRINTER FAMILY TO SHOP ALTALINK PRODUCTS