Samsung-CLT508

Two parallel cartridge lines feed Samsung's workgroup color lasers. The high-yield line, CLT-508L, is built on CLT-K508L black with CLT-C508L cyan, CLT-M508L magenta and CLT-Y508L yellow beside it. Alongside sits the standard-yield CLT-508S range — CLT-K508S black, CLT-C508S cyan, CLT-M508S magenta and CLT-Y508S yellow — for machines that print less. Both lines fit the same printers; the difference is yield, not compatibility.
These are shared machines: a CLP-670ND on a department network, or a CLX-6250FX multifunction copying and scanning for a whole team. The color work there is reports, charts and client documents — steady, deadline-driven printing where an empty cartridge at the wrong moment holds up more than one person. That workload is what the two yield lines and the multi-cartridge sets below are arranged for.
Toner Cartridges for CLT-508
High-yield CLT-508L cartridges
Standard-yield CLT-508S cartridges
Which cartridge should you buy?
Volume makes the decision. A printer serving a team, or one that turns out color documents daily, belongs on the L line: the high-yield cartridges run longer between changes and lower the attention the machine demands. A lightly used printer — a manager's office unit, a branch machine — is served just as well by the S line and avoids paying for capacity it will take years to use. Within either line, replace colors individually as they empty, reach for the four-color sets when several slots run low together, and use the black bundles to keep the hardest-working slot ahead of demand.
Chip, toner and everyday use
On a shared printer, treat the low-toner warning as a purchasing trigger rather than an emergency: order the flagged color and swap it when output quality actually dips, since the warning is an estimate. Whoever fits cartridges for the team should keep one full set in the cupboard — a shared machine with no spare turns a routine warning into a stalled department. After any fitting, let the printer run a few jobs before judging the level gauge; readings settle as the new cartridge starts turning.
Frequently Asked Questions
Can I mix CLT-508L and CLT-508S cartridges in the same printer?
Yes. Each color slot accepts either line, so a printer can run a high-yield CLT-K508L black beside standard colors, or the reverse. The lines differ in how much toner they hold, not in how they fit.
Which line suits a CLP-620 on a busy network?
The CLP-620 is in the family list below, and a networked one belongs on the L line: fewer interruptions, fewer orders, and black bundles sized for shared use. Save the S line for machines whose monthly volume is genuinely small.
The printer says magenta is low, but prints still look right. Replace it now?
Not yet. The warning is a forecast, not a verdict. Order the magenta single so it is on hand, keep printing, and swap when color quality visibly softens — that squeezes the full value out of the cartridge already fitted.
What is the difference between the 3, 5, 6 and 8 Color Sets?
The number counts the cartridges in the box, and each listing's name spells out which color codes are inside: the 3-color sets hold cyan, magenta and yellow only, while the 8-color sets hold two full rounds of all four colors. Check the codes in the listing name against the slots you actually need to fill.
More printers that use the same cartridges
Every model below runs on this same pair of cartridge lines: CLX-6250FX, CLX-6250FR, CLX-6250, CLX-6220FX/XAA, CLX-6220FX, CLX-6220, CLP-670ND, CLP-670N, CLP-670, CLP-620ND, CLP-620.
