ML-160W

The Samsung ML-160W is the wireless version of the pocket-sized ML-160 — a tiny Wi-Fi mono laser that could print from a laptop anywhere in the room.

Its cartridge is the ML-D1630A. Compatible and genuine OEM toner for the ML-160W is available here.

Toner Cartridges for ML-160W

This printer works with the following toner cartridges:

• Samsung ML-D1630A

More Samsung Printers

• ML-1630
• ML-1630W
• SCX-4500
• SCX-4500W
• ML-160
• SCX-4501K
• ML-1631K

Frequently Asked Questions

The ML-160W says toner is low — roughly how many more pages can I print?

To stretch a low ML-D1630A in the ML-160W, enable toner-save or draft mode in the driver for everyday documents. The lighter output is fine for internal use and meaningfully extends the cartridge. Switch back to normal quality for anything final or client-facing.

My ML-160W output shows bands of uneven density — why does this happen?

Vertical streaks from the ML-160W usually point to a scratched or dirty imaging drum rather than the toner itself. Run the cleaning function in the driver and inspect the drum surface for marks. If the streak sits in the same spot on every page, the drum or imaging unit is the likely replacement, not the ML-D1630A cartridge.

Printed web pages from the ML-160W look bad — what usually causes this?

Washed-out prints from the ML-160W can often be fixed in the driver by raising the darkness or density slider and turning off toner-save mode. These controls adjust how much toner the ML-D1630A deposits per dot. Only suspect a failing cartridge if the settings are already at full density.