S800
The Canon S800 is a desktop photo printer that lays down photographs with the dye-based BCI-6 Black, BCI-6 Cyan, BCI-6 Magenta and BCI-6 Yellow, refined by BCI-6 Photo Cyan and BCI-6 Photo Magenta and extended by BCI-6 Red and BCI-6 Green — every one of those tanks rated at about 280 pages. Paperwork is handled by a separate pigment cartridge, the BCI-3E Black, rated near 420 pages. All nine cartridges are stocked here as Clever Supplies compatibles filled to the original specification, and each position is replaced individually as it empties.
The S800 was built for photographs, and photographs pick favorites. Whichever shades dominate your images are the tanks that fall first — blue-heavy work drains cyan and photo cyan, portraits lean on the magentas — while the pigment black waits almost untouched for the occasional document. That is why experienced owners of this machine stock spares by shade rather than by set: the tank a print run actually empties is the only one that needs replacing, and the rest of the row can carry on for months. This family sat behind Canon's best-regarded desktop photo printers of its era, and a good many are still in daily use.
Ink Cartridges for the S800
| Cartridge | Color | Page Yield |
|---|---|---|
| BCI-6 Black | Black | About 280 pages |
| BCI-6 Cyan | Cyan | About 280 pages |
| BCI-6 Magenta | Magenta | About 280 pages |
| BCI-6 Yellow | Yellow | About 280 pages |
| BCI-6 Photo Cyan | Photo Cyan | About 280 pages |
| BCI-6 Photo Magenta | Photo Magenta | About 280 pages |
| BCI-6 Red | Red | About 280 pages |
| BCI-6 Green | Green | About 280 pages |
| BCI-3E Black | Black (pigment, for documents) | About 420 pages |
| BCI-3E Set of 10 | Mixed (BCI-3E range) | See product page |
| BCI-3E / BCI-6 Set of 11 | Mixed, extra blacks | See product page |
| BCI-3E / BCI-6 Set of 5 | Mixed starter set | See product page |
| BCI-6 Set of 14 | 4 black, 2 each of C/M/Y/PC/PM | See product page |
| BCI-6 Set of 6 | Core color row | See product page |
| BCI-6 Set of 18 | Full range incl. red and green | See product page |
| BCI-6 Set of 8 | Main slots together | See product page |
Which cartridge should you buy?
For most S800 owners the right order is a single tank: the color the printer has just flagged. Singles keep the per-tank cost lowest and waste nothing, because a half-full neighbor gains you nothing by being changed early. Sets earn their place at a full-row refresh — after a long layoff, or when several positions report low together. The six- and eight-tank BCI-6 boxes cover the core positions in one order; the fourteen- and eighteen-tank boxes double up the colors a photo printer cycles fastest, and the largest adds spares of red and green. If the machine prints documents as often as photos, the mixed BCI-3E/BCI-6 boxes or a spare pigment black keep the text side fed. Every compatible cartridge here carries a 1-year warranty and 1-year returns.
Chips, ink levels and everyday use
Forget chips and reset tools: the S800 senses its levels optically, straight through the tank wall, so a fresh cartridge clicks in and the printer is ready. Its one real weakness is idleness — weeks without printing let ink dry at the nozzles, and when that happens a cleaning cycle and a test print bring the machine back in almost every case. Ratings near 280 pages per color assume roughly 5% coverage; a full-bleed photograph spends ink far faster than a page of text, so treat the figure as a planning guide. Store unopened tanks sealed and upright, and print something every few weeks to keep the heads wet.
Frequently Asked Questions
Which tanks does the Canon S800 print with?
Eight BCI-6 dye tanks — black, cyan, magenta, yellow, photo cyan, photo magenta, red and green — for photographic work, plus the BCI-3E pigment black for documents. Each position is a separate cartridge and is changed on its own schedule.
Why do my photo colors run out at such different times?
Because images are not balanced. A run of seascapes spends cyan and photo cyan; a run of portraits spends the magentas. Uneven emptying is the normal signature of a photo printer, not a leaking tank, and it is why spares are best matched to your subjects.
Is there a separate drum to replace on the S800?
No drum exists in this design. The nine cartridges above are the only consumables; faded output means a low tank or nozzles that need a cleaning cycle.
Do these cartridges need a chip reset after installation?
No. Ink is gauged optically from the tank itself, so installation is a straight swap of the empty position with no reset tool and no recognition message.
More printers that use the same cartridges
The same shelf of BCI-6 and BCI-3E tanks feeds a broad family of Canon photo printers, desktops and all-in-ones:
i9900, i960, i950, i900D, i865, i860, i850, i560, i550, S9000, S900, S830D, S820D, S750, S630, S600, S530D, S520, S500, S450, S400, PIXMA iP8500, PIXMA iP6000D, PIXMA iP5000, PIXMA iP4000R, PIXMA iP4000, PIXMA iP3000, PIXMA MP780, PIXMA MP760, PIXMA MP750, Multipass F30, Multipass C755, MultiPass MP730, MultiPass MP700, MultiPass F80, MultiPass F60, MultiPass F50, BJC-8200, BJC-6100, BJC-6000, BJC-3000
