DCP-9040
The Brother DCP-9040 is the base designation behind the DCP-9040CN — the model that opened Brother's color laser all-in-one line in late 2007 at a $500 price point. It prints and copies in color at 21 pages per minute through a 35-sheet document feeder, with standard Ethernet and USB 2.0 connections. Its four toner slots accept two cartridge generations: the standard-yield TN110 family — TN110BK in black at about 2,500 pages, with TN110C, TN110M and TN110Y covering cyan, magenta and yellow at about 1,500 pages each — and the high-yield TN115 family, where black is the TN115BK at about 5,000 pages and the colors are TN115C, TN115M and TN115Y at about 4,000 pages each.
As the starter model of the line, the DCP-9040 was many small offices' first color laser — and its supply shelf still reflects that role. Color on this machine is occasional for most owners: a chart in a report, a logo on a letterhead. Black does the everyday work, which is why the black slot empties first and why the smartest upgrades on this page are black-focused. Each of the four slots is independent, so nothing forces you to treat the colors as a set.
Toner Cartridges for DCP-9040
Which cartridge should you buy?
Begin with the slot that actually runs out. For most DCP-9040 owners that is black, and the TN115BK is the upgrade that matters: roughly 5,000 pages against the standard black's 2,500, at a lower cost per page. The three colors can stay on the standard TN110 line until your color volume proves otherwise — each is replaced only when it empties, so there is no penalty for mixing yields across slots. When several colors do run low together, the four-color sets in the table beat buying singles one by one. This page stocks compatible sets and multi-packs alongside genuine Brother singles, so each slot can be filled at the level its workload justifies.
Chip, toner and everyday use
Four slots means four chips, and the machine reports each color's level on its own — a low cyan warning never means the black is tired. Fit the cartridge the display names, in the slot it names; the color-coded handles make mix-ups unlikely. Yield ratings assume about 5% coverage per color, so a page with a large color photograph spends far more cyan, magenta and yellow than a page of black text with a small chart. Keep one spare of the color you burn fastest, store spares sealed and flat, and remember that two-sided work on this model is manual — the driver walks you through flipping the stack.
Frequently Asked Questions
What toner does the Brother DCP-9040 use?
It uses Brother TN110 standard-yield or TN115 high-yield toner in four colors: black, cyan, magenta and yellow. Standard yield is about 2,500 pages in black and 1,500 per color; high yield is about 5,000 in black and 4,000 per color.
Do I have to replace all four colors at once?
No — each color is a separate cartridge in its own slot, and the machine tracks them individually. You replace only the one that runs out, and the others keep working.
Which cartridge should I upgrade first, the TN110 or TN115 line?
Black, for most owners. Everyday documents spend black toner fastest, so moving the black slot to the high-yield TN115BK roughly doubles the interval between changes while the colors can stay standard yield until their use grows.
Are the cartridges on this page original or compatible?
Both kinds are stocked: compatible sets, multi-packs and a premium high-yield black, plus genuine Brother single cartridges in every color. Each listing in the table says which it is.
More printers that use the same cartridges
The DCP-9040 shares its TN110 and TN115 cartridges with the rest of Brother’s first color laser generation: Brother-TN110, Brother-TN115, DCP-9040CDN, DCP-9040CN, DCP-9042CDN, DCP-9045, DCP-9045CDN, DCP-9045CN, HL-4040, HL-4040CD, HL-4040CDN, HL-4040CDW, HL-4040CN, HL-4050, HL-4050CDN, HL-4050CN, HL-4070, HL-4070CDS, HL-4070CDW, MFC-9440, MFC-9440CN, MFC-9450, MFC-9450CDN, MFC-9840, MFC-9840CDW, MFC-9842CDW.
