WorkCentre M128
The Xerox WorkCentre M128 is a multifunction system built for offices that need consistent, reliable output, and its footprint sits comfortably in crowded office spaces. Everything it prints runs on one black cartridge, the 006R01184, and this page stocks that cartridge as a single, in a 3 pack and in two 5 pack listings, so the supply shelf for this machine stays simple.
A machine like the M128 usually anchors a workgroup corner: one device that several people print from, copy on and scan through across the day. That shared duty is exactly why a single-cartridge supply list matters — there is no color set to keep track of and no second part number to reorder by mistake, just one cartridge to keep a spare of so the machine never waits on a delivery.
Toner Cartridges for WorkCentre M128
| Cartridge | Color | Page Yield |
|---|---|---|
| 006R01184 | Black | See product page |
| 006R01184 3 Pack | Black | See product page |
| 006R01184 5 Pack | Black | See product page |
| 006R01184 Premium 5 Pack | Black | See product page |
Which cartridge should you buy?
There is no standard-versus-high-yield decision on the M128, because Xerox kept this machine on a single cartridge code — the real choice is how many cartridges to keep in the building. A single suits a lightly used machine or a first restock after a move. The 3 pack fits a workgroup that prints steadily and would rather reorder a few times a year than a few times a month. Either 5 pack stretches that further for high-volume floors, and the Premium listing is a second build of the same five-cartridge quantity for buyers who prefer that line. Every compatible cartridge here is covered by a 1-year warranty and 1-year returns, so pack size can be chosen on usage alone.
Chip, toner and everyday use
The M128 reads its cartridge on installation, so a swap is mostly about seating: power the machine on, open the toner access cover, pull the spent cartridge straight out and slide the fresh one in until it sits firmly. Before it goes in, rock the new cartridge gently from side to side a few times — that levels the toner inside after shipping and storage. Page yields are estimates figured at 5% page coverage, so dense forms and heavy graphics finish a cartridge sooner than the rating suggests. Keep the spare in its sealed bag, flat and out of direct sunlight, and an office that shares this machine will rarely think about toner at all.
Frequently Asked Questions
Which toner cartridge fits the WorkCentre M128?
Only one: the 006R01184 black cartridge. Every listing on this page is that cartridge in a different quantity, so the fit question is settled the moment the code on your old cartridge matches.
Is there a high-yield version of the M128 cartridge?
No separate high-yield code exists for this machine. The economy comes from quantity instead — the 3 pack and the two 5 pack listings lower the cost per cartridge against buying singles one at a time.
Does this page sell a drum unit for the M128?
No drum listing is carried for the M128 here. The products above are the toner cartridge only, in four pack options.
The low-toner warning appeared but prints still look clean. Should I swap now?
Not yet. The warning is an estimate, and even output is a better signal than the message — keep printing while text stays solid, rock the cartridge gently once if pages start to fade, and change it when the fade returns. Keep the next cartridge in the cupboard so the swap takes minutes when it comes.
More printers that use the same cartridges
One cartridge serves a whole generation of Xerox machines — if your office also runs any of the models below, the same 006R01184 stock covers them:
the CopyCentre line: CopyCentre 123, CopyCentre 128, CopyCentre 133, CopyCentre 133C, CopyCentre C123, CopyCentre C128, CopyCentre C133; the WorkCentre line: WorkCentre 123, WorkCentre 128, WorkCentre 133, WorkCentre 133M, WorkCentre M123, WorkCentre M133; the WorkCentre Pro line: WorkCentre Pro 123, WorkCentre Pro 123, WorkCentre Pro 128, WorkCentre Pro 133, WorkCentre Pro 133P, WorkCentre Pro M123, WorkCentre Pro M128, WorkCentre Pro M133.
