Frequently Asked Questions

Our SL-M2675F copies as much as it prints — does copying wear this drum the same way?

Yes, page for page. Whether the machine is printing from a computer, copying a document or printing an incoming fax, the image is formed on the same surface — the MLT-R116 drum — before it reaches the paper. Every imaged page counts toward its 9,000-page rated life, whatever job produced it. The one function that never touches the drum is scanning to a file: no image is laid down, so no drum wear accrues. On a hard-working multifunction like the SL-M2675F, copies are usually the silent half of the drum's workload.

Copies have started coming out streaky — is that the drum or the toner?

Run the cheap test first: if the streaks are there on copies and prints alike, and a fresh toner cartridge did not clear them, the surface is the suspect. Toner problems usually announce themselves as even fading — the whole page getting lighter as the powder runs down. Drum wear is ruder: lines down the page, marks that repeat, a grey shadow behind text. The MLT-R116 is the part that carries those faults, because it is the part every page is imaged on.

If I fit this drum, does my current toner cartridge get wasted?

Not at all. On the SL-M2675F the toner and the drum are independent units. Your MLT-D116L or MLT-D116S cartridge — new, half-used, whatever state it is in — comes out as part of the swap path and goes straight back in front of the fresh MLT-R116 to live out its own life. You replace only the surface the image quality is blaming, and the toner spend you have already made keeps working for you.

How long should one drum last in a machine that prints, copies and faxes?

The rating is 9,000 imaged pages, which on an MFP means adding the three streams together. A desk moving 400 printed pages and 200 copies a month is spending 600 pages of drum life monthly, so a unit lasts around fifteen months; a busier office at double that halves the figure. Roughly three high-yield MLT-D116L toners pass through the machine in the same span — if you are on your third toner and quality is slipping, the drum's age is the likely story.

Which other printers use this same drum unit?

This listing is titled for the SL-M2675F, and the MLT-R116 is the common imaging unit for the SL-M2835DW, SL-M2885FW, SL-M2625D, SL-M2825DW and SL-M2875FD as well. The spent unit you remove will be marked MLT-R116 — that code, not the badge on the machine, is what identifies this replacement.

What guarantee and returns cover comes with it?

A full year of warranty cover on the unit, with returns free of charge throughout that first year if it fails to perform — details on the shipping and returns page. Orders leave from our IL, PA, GA and CA warehouses, and support is available Monday to Friday, 9 AM to 5 PM CST should you want the symptoms talked through before ordering.

About This MLT-R116 Drum Unit for the SL-M2675F

One compatible MLT-R116 imaging unit at $82.75, rated for 9,000 pages of prints, copies and received faxes combined — about 0.92 cents of drum per page. It holds no toner; it is the imaging surface an SL-M2675F forms every page on, replaced when streaks and shading stop responding to toner changes, with your existing cartridge carried over. The same unit fits the five sibling models above, and their shared supplies are in the Samsung toner range.