null

0

Your cart is empty

Phaser 6505

The Xerox Phaser 6505 is a laser printer designed for the office, and it prints from four high-yield cartridges — black 106R01597, cyan 106R01594, magenta 106R01595 and yellow 106R01596 — each replaced on its own as it runs down. It handles daily workloads with ease, and its duplex and finishing options help offices produce polished documents in-house.

That finishing angle shapes how this printer is used: proposals, brochures and client-facing documents come off the 6505 looking deliberate rather than dashed off. Color pages like those lean harder on cyan, magenta and yellow than plain correspondence does, so on this model the color cartridges earn their keep. Watching which color the office actually burns through is the first step to stocking sensibly.

Toner Cartridges for Phaser 6505

CartridgeColorPage Yield
106R01595 Laser Toner Cartridge High Yield MagentaMagentaSee product page
106R01596 Laser Toner Cartridge High Yield YellowYellowSee product page
106R01597 Laser Toner Cartridge High Yield BlackBlackSee product page
106R01594 Laser Toner Cartridge High Yield CyanCyanSee product page
Laser Toner Cartridges High Yield 4 Color SetSetSee product page
Phaser 6505 Laser Toner Cartridges High Yield 4 Color SetSetSee product page
Phaser 6505 Premium Quality Laser Toner Cartridges High Yield 4 Color SetSetSee product page

Which cartridge should you buy?

There is one capacity family for this printer on this page — the high-yield set — so the real decision is singles versus a full set. Singles make sense in steady state: a color fades, you swap that color, and the other three keep working. A four-color set is the better buy when the printer is newly installed, when two or more colors are near empty together, or when you want one delivery to reset the whole machine. If your 6505 spends its life on presentation documents, keep the color you use most — often 106R01594 cyan — as a shelf spare so a deadline never waits on a delivery.

Chip, toner and everyday use

A small chip on the back of each cartridge tells the printer which color is fitted and tracks how much toner is left. Fit the cartridge with a straight push until it seats; a half-seated cartridge is the usual cause of a cartridge not being recognized. Rocking a new cartridge gently before installation evens out the toner inside after storage. Page yields quoted for these cartridges rest on the standard five percent coverage estimate, so heavy color fills will always land below the headline figure. Keep spare cartridges sealed until the day they are needed.

Frequently Asked Questions

Which toner cartridge fits the Phaser 6505?

The 6505 runs on 106R01597 black, 106R01594 cyan, 106R01595 magenta and 106R01596 yellow, all in high-yield form.

Does duplex printing change which cartridge I need?

No. Two-sided printing uses the same four cartridges; it saves paper, not toner. Order by the code of the color that has run low, whatever your print settings are.

Should I buy the four-color set or single cartridges?

Singles are cheaper in the long run when colors fade one at a time, because you only pay for the color that is empty. The set wins when several colors are low at once or the machine is being set up for the first time.

How do I swap a cartridge in the Phaser 6505?

Open the toner access cover, pull the spent cartridge straight out, rock its replacement gently side to side, slide it in until it seats, and close the cover. The printer is ready again once the new chip is read.

More printers that use the same cartridges

This cartridge family is shared across a group of Phaser and WorkCentre models, so toner bought for one often fits the next desk over: Phaser 6500, Phaser 6500DN, Phaser 6500N, Phaser 6505DN, Phaser 6505N, WorkCentre 6505, WorkCentre 6505DN, WorkCentre 6505N.

SELECT YOUR PRINTER FAMILY TO SHOP Phaser 6505 PRODUCTS