Frequently Asked Questions
Before I order, how do I confirm these are the cartridges my printer actually takes?
Pull any one of the cartridges already in the machine and read the number on its label, or check the supplies screen on the Phaser 6180 itself. The four numbers you are matching are 113R00726 for black, 113R00723 for cyan, 113R00724 for magenta and 113R00725 for yellow. If the labels in your printer carry those same four numbers, this set is the refill for your machine — no need to measure cartridges or compare shapes.
We proof a lot of full-color artwork. Will the color ratings hold up?
The ratings are measured at standard page coverage: 8,000 pages for the black cartridge and 6,000 for each of the three colors. Proofing work lays down far more toner per sheet than an office document, so a studio pushing full-bleed comps and photo-heavy layouts will see the color numbers land lower in practice. Black usually survives longest here because text markups and proofs lean on the colors far harder.
What exactly is in the carton for $211.70?
Four sealed high-yield cartridges — one black, one cyan, one magenta and one yellow. That is the complete carton. Drum units and other machine supplies are separate items with part numbers of their own, so if the printer is also asking for one of those, it goes on its own order line.
Cyan ran dry in the middle of a proof run. Do I have to change all four?
No. Each cartridge sits in its own slot as its own sealed unit, so you pull the spent cyan, slide the fresh one in and leave black, magenta and yellow exactly where they are. The run can pick back up as soon as the machine registers the new cartridge.
How does a set get to us, and how fast?
Your set ships from whichever of our warehouses in IL, PA, GA and CA is closest to your address, and the carrier options and delivery windows are laid out on our shipping and returns page. Studios on a client deadline usually keep one sealed set on the shelf so a low-toner warning never lands the day proofs are due.
If one of the cartridges is faulty, what covers us?
Every cartridge in the set is backed by a 1-year warranty together with 1-year free returns, so a defective unit goes back for a replacement or a refund rather than turning into an argument. Our support team answers Monday through Friday, 9 AM to 5 PM CST, and the wider Xerox range sits on the brand page if other machines in the studio need feeding too.
Where should a spare set wait in a small studio so it is ready on deadline day?
Keep the four cartridges sealed in their own packaging, lying flat in a cupboard away from heaters, radiators and direct sunlight. Toner is a dry powder, so a sealed cartridge simply waits — nothing dries out and no clock runs against it. Open each unit only when its channel calls for it: pop the seal on the 113R00723 cyan only when cyan is the one the machine is asking for, and leave the other three sealed until their turn comes.
Is there a sensible order for changing cartridges during a proof run?
Work one channel at a time and finish that swap completely before touching anything else. Pull the spent unit, check the number on the fresh one against the slot — 113R00726 black, 113R00723 cyan, 113R00724 magenta, 113R00725 yellow — seat it until it settles, then close up and let the machine register it before printing a single test page. Changing one at a time means a mis-seated cartridge is easy to spot, because only one channel changed since the last good page.
A color looks pale on proofs, but the printer has not warned about it yet. What is happening?
Heavy proofing can drain a channel unevenly, so the last of the toner sits at one end of the cartridge while the coverage-heavy pages keep coming. Take that cartridge out and rock it gently side to side a few times to redistribute what remains, then run the proof page again. If the color comes back even, you have bought some pages; if it stays pale, that channel is genuinely near the end and the fresh unit should go in.
What should the studio do with the empty cartridges once they come out?
Drop each spent unit straight back into the packaging its replacement came in, so no loose toner dust escapes into the studio, and keep the boxed empties together in one corner until all four are out. From there they can go through whatever local electronics or office-supply recycling route the studio already uses. Keeping the empties boxed and grouped also makes the reorder check simple — four empty boxes on the shelf means a full set has been used.
About This Phaser 6180 High-Yield Four-Color Toner Set
A Phaser 6180 in a small studio earns its desk space on color work — comps, proofs and the occasional finished piece a client takes away. This set is matched to that workload: 8,000 pages from the black 113R00726 and 6,000 from each color means the machine is not constantly asking for supplies between jobs. Match the four numbers on your labels, order the set at $211.70, and keep a sealed spare on the shelf for deadline weeks.
Full compatibility list: Phaser 6180MFP/D, Phaser 6180MFP/N, Phaser 6180, Phaser 6180DN and Phaser 6180MFP. Prefer to replace colors as they fade? The separate listings are black (113R00726), the 113R00723 cyan cartridge, the magenta 113R00724 cartridge and yellow (113R00725).