LaserJet M426dw MFP

The LaserJet M426dw MFP comes from the mid-2010s, when offices bought multifunction printers for durability first — and a great many of these monochrome machines are still at work. It prints, scans and copies on the HP 26A family: the standard-yield CF226A for the everyday load and the high-yield 26X (CF226X) for the heavy weeks. This page stocks the family in multipacks — four standard cartridges in one box, and the high-yield cartridge in packs of two and four.
Durability-first machines build a loyal installed base because they remove a category of worry: the M426dw MFP just handles the office's printing, scanning and copying year after year. That loyalty has a supply-side benefit too — the cartridge family is shared across the M402 and M426 lines, so the codes below are among the most widely stocked HP cartridges of their generation and stay easy to source.
Toner Cartridges for LaserJet M426dw MFP
| Cartridge | Color | Page Yield |
|---|---|---|
| HP 26A (CF226A) Toner Cartridge — 4 Black | Black | See product page |
| HP 26X (CF226X) Toner Cartridge — 2 Black | Black | See product page |
| HP 26X (CF226X) Toner Cartridge — 4 Black | Black | See product page |
Which cartridge should you buy?
For a shared MFP, the honest dividing line is swap frequency. The standard CF226A four-pack keeps a moderately used machine supplied for a long stretch and spreads its cost over four cartridges. The high-yield CF226X holds more toner per cartridge, so on a machine that prints and copies through the whole workday it cuts both the per-page cost and the number of times someone has to stop and change a cartridge — its two-pack suits a single busy unit, the four-pack a unit that never really rests. Whichever tier you choose, buying in packs means the replacement is already in the cupboard when the toner light comes on.
Chip, toner and everyday use
Most cartridge-change problems on this machine are mechanical rather than electronic: a sealing strip left in place, a cartridge not pushed fully home, or a door closed before the cartridge settled. Work through those three before suspecting the cartridge itself — remove it, confirm the strip is gone, reseat it firmly and read whatever the display offers, since the printer usually names the problem. Toners from a multipack keep best in their sealed packaging in a cool, dry spot; heat and humidity age toner faster than time does.
Frequently Asked Questions
How do I know I am buying the right toner for the LaserJet M426dw MFP?
Compare the code on the box with this model's pair: CF226A and CF226X. HP sells look-alike cartridges for other families that will not fit or register here, so an exact code match is the whole test.
The printer will not print after a cartridge change — what should I check?
Confirm the new cartridge's sealing tape was fully removed and that the cartridge is seated all the way in. Then read the display message and follow its steps. Pulling the cartridge and reinserting it with the printer powered on clears most recognition errors.
Can I still scan with the LaserJet M426dw MFP when the toner is out?
Yes — scanning does not consume toner, so the M426dw MFP keeps scanning to a computer with an empty cartridge installed. Copying prints the scan, so copies pause until toner is replaced; change the cartridge when copies start to fade.
Standard or high-yield toner for a shared MFP?
Shared machines burn toner at the team's pace, not one person's, so the high-yield CF226X usually wins on cost per page and on fewer interruptions. The standard CF226A pack remains the economical pick for an MFP that sees only light, occasional duty.
More printers that use the same cartridges
The rest of the family that runs on these cartridges: LaserJet Pro MFP M426FDN, LaserJet Pro M402, LaserJet M426fdn MFP, LaserJet M426FDW, LaserJet M402n MFP, LaserJet M402d, LaserJet M402DW, LaserJet M402DN, LaserJet M402D.
