SKU:

CS-EP-748-CXL

Condition:

New Compatible

OEM Part #:

T748XL220

Color:

Cyan

Ink Type:

Pigment

Page Yield:

Up to 4,000 pages (ISO/IEC 24711)

Chip:

New compatible chip

Warranty:

Lifetime Warranty

Returns:

1-Year Free Returns

Frequently Asked Questions

Is this the standard, XL or XXL pack?

XL — the high-capacity tier. For cyan the three tiers rate as follows on ISO/IEC 24711: standard 1,500 pages, this XL pack 4,000 pages, XXL 7,000 pages. We stock the XL tier as compatible packs; the standard and XXL tiers are listed here only so you can match the code on the pack you are removing.

Which printers take this pack?

All five verified 748 models: WF-6090, WF-6530, WF-6590, WF-8090 and WF-8590. Every one of them accepts the XL tier in all four colours.

Will my printer recognise this pack?

This cartridge carries a new compatible chip. If your printer's firmware has been updated, recognition issues can occasionally occur; if a warning appears, power the printer off, reseat the pack until it is firmly seated, and restart before judging it. We do not promise recognition under every future firmware version — if a recognition problem cannot be cleared, the pack is covered by our lifetime warranty.

What does the cyan pack actually do in a business document?

Cyan carries charts, links, logos and shaded tables in office colour work, and it is one of the three colours the printer uses to build every full-colour page. When cyan runs low the printer stops rather than printing skewed colours, so a spent cyan pack blocks the machine just as completely as a spent black.

The printer says the pack is not recognised. What should I do first?

Power the printer off, remove the pack, check that the green chip contacts are clean and dry and that you have not touched them, reseat the pack, and power back on. If a firmware update immediately preceded the message, that update is the likely trigger — contact us and we will work through it under the lifetime warranty.

What kind of ink is in this pack?

DURABrite Pro pigment ink, the ink type Epson specifies for the whole 748 family in all four colours. Pigment ink gives these workgroup printers their smudge-, water- and fade-resistant document output.

Is this a genuine Epson pack?

No — it is a Clever Supplies compatible ink pack built to the T748XL220 specification and labelled compatible on the box and on this page. It is not manufactured by Epson.

Can I mix XL packs with standard or XXL packs in the same printer?

Yes, within the tiers your model accepts. Each colour position is independent, so an XL colour can sit alongside a standard or XXL black — except on the WF-6530, which accepts standard and XL only and must never be fitted with XXL packs.

How much ink is in the pack, in millilitres?

We do not publish a figure: Epson's official US sources do not state a millilitre volume for the 748 packs, so the Volume field is left blank rather than filled with a reseller's claim. The verifiable comparison for this family is the ISO page yield.

How do I install it?

Remove the spent pack for this colour, unpack the new pack only when you are ready to install it, avoid touching the green chip, insert the pack into its colour position until it seats firmly, and let the printer charge the ink before printing. Install a new pack promptly after removing the old one so the print head does not dry out.

How should I store a spare pack?

Sealed in its packaging, upright, at room temperature and out of direct sunlight. Do not open a spare until install day. No specific shelf-life figure is published for this product, so none is printed in its specifications.

Is there a set of four I should buy instead?

Not in this family from us: there is no compatible 748 set in our range, so the four XL colours are ordered as individual packs. That also means you never pay for a colour your printer has not asked for. Every pack carries the lifetime warranty, with free returns for the first year.