Phaser 6125N
Dependable, no-fuss document printing is the brief the Xerox Phaser 6125N was built to fill — reports, correspondence and everyday office paperwork, day after day. Its toner is ordered color by color: black is 106R01334, and the three color slots take cyan 106R01331, magenta 106R01332 and yellow 106R01333. The compatible listings stocked for the 6125N are gathered below.
An office that prints documents all week wants its supplies predictable, and the 6125N's layout helps: no combined color block, no guessing — each slot announces itself separately and takes its own cartridge. In practice that means most orders for this machine are a single black or a single color, placed when the warning appears, with a full set ordered only on the rare occasions when the whole machine is due a refresh.
Toner Cartridges for Phaser 6125N
| Cartridge | Color | Page Yield |
|---|---|---|
| 106R01334 | Black | — |
| 106R01331 | Cyan | — |
| 106R01332 | Magenta | — |
| 106R01333 | Yellow | — |
| 106R01334 | Black | — |
| 106R01331 | Cyan | — |
| 106R01332 | Magenta | — |
| 106R01333 | Yellow | — |
| 106R01334 + 106R01331 + 106R01332 + 106R01333 | 4 Color Set | One of each cartridge |
| 106R01334 + 106R01331 + 106R01332 + 106R01333 | 4 Color Set | One of each cartridge |
| 106R01334 + 106R01331 + 106R01332 + 106R01333 | 4 Color Set, Premium | One of each cartridge |
| 106R01334 + 106R01331 + 106R01332 + 106R01333 | 4 Color Set | One of each cartridge |
Which cartridge should you buy?
For the routine top-up, buy the single cartridge in the color the printer names — the four numbers appear both as code-numbered singles and as 6125N-named listings, and either listing delivers the cartridge your machine asks for. The 6125N 4 Color Set is the sensible order when several levels are low together or when you are setting up a spares drawer for a printer nobody wants to think about: one box covers every slot the machine has. A Premium Quality 4 Color Set is also listed for owners who prefer the premium line. Yield ratings for this cartridge family are printed on the individual product pages, so compare there when deciding between a single and a set.
Chip, toner and everyday use
The 6125N reads a chip on each cartridge to estimate what is left, and estimates drift with the kind of work you print — a color can look healthy on the gauge and still run out during one long graphics job. When a replacement goes in, remove the old cartridge, rock the new one slowly from side to side, and slide it into its color slot until it stops firmly; the level should read full once the cover is closed. If it does not, reseat the cartridge before suspecting a fault. Keep the next cartridge sealed until the day it is needed, stored flat in a cool place, and the changeover stays a two-minute job.
Frequently Asked Questions
What toner does the Phaser 6125N use?
Four cartridges: 106R01334 black, 106R01331 cyan, 106R01332 magenta and 106R01333 yellow. Each is a separate unit and each is listed above, on its own and in sets.
Can I replace one color at a time in the 6125N?
Yes — that is how the machine is designed to be run. The four slots are independent, so a spent magenta never obliges you to touch the black, cyan or yellow cartridges.
Is there a premium set for this model?
Yes. Alongside the standard sets, a Phaser 6125N Premium Quality 4 Color Set is listed, containing one cartridge of each color plus black in the premium line.
Will Phaser 6125 cartridges fit the 6125N?
The same four cartridge numbers are listed for both models, and the Phaser 6125 is this printer's family sibling below. To be certain the listing matches your machine, order the 6125N-named products or the code-numbered singles from this page.
More printers that use the same cartridges
One other model in the range is fed by this same set of four cartridge numbers: Phaser 6125.
