FS-1800N

The N is the upgrade: the Kyocera FS-1800N takes the proven FS-1800 platform and adds built-in network connectivity, so a whole workgroup shares one sturdy monochrome printer instead of gathering around a single PC. Nothing about the supply changes — it runs the same TK-60 black toner as the base model, ordered under Kyocera part number 1T02BR0US0 and rated for approximately 20,000 pages per ISO/IEC 19752. Every listing below is that cartridge, in single, two-pack and four-pack boxes.

This is legacy hardware kept in service for a reason: the engine is simple, the pages are sharp, and a 20,000-page cartridge means the supply conversation happens a couple of times a year rather than every month. Supply stocks and ordering routines already set up for the FS-1800 carry straight over, since the network version changes how jobs arrive, not what the printer consumes. For an office standardizing its older Kyocera fleet, that continuity is worth as much as the networking itself.

Toner Cartridges for FS-1800N

Which cartridge should you buy?

One cartridge, three box sizes — the choice is about how your office buys. A single is right for a light-use machine or a first trial of a compatible in a printer this old. The two pack suits a workgroup that prints steadily and wants the next cartridge already on the shelf when the warning appears. The four pack is for sites keeping several of these printers alive off one order: at 20,000 pages per cartridge, four boxes is a very long runway, and the per-cartridge cost is at its lowest. All of them are compatible cartridges backed by a 1-year warranty and 1-year returns.

Chip, toner and everyday use

Replacing the cartridge is a front-access job that takes a couple of minutes; rock the new unit gently end to end first so the toner bed settles evenly, then slide it in until it locks. Yields are quoted at the standard 5 percent test coverage — a printer feeding on dense reports will finish a cartridge sooner than the headline 20,000 pages, while ordinary correspondence can approach it. Keep spares sealed and stored flat away from heat, and an older machine like this one will keep rewarding basic care with clean, even pages.

Frequently Asked Questions

Which toner does the FS-1800N use?

The TK-60 black cartridge, Kyocera part number 1T02BR0US0, rated for approximately 20,000 pages. It is the same cartridge the base FS-1800 takes, so existing stock works in the network model unchanged.

What does the N in FS-1800N mean?

Network. The FS-1800N adds built-in Ethernet to the 18-ppm FS-1800 platform, which is what lets a workgroup share it without a dedicated print server or a host PC left switched on.

How many pages will one cartridge realistically print?

Around 20,000 at the ISO/IEC 19752 test coverage of roughly 5 percent. Heavy graphics coverage reduces the count; plain office documents come closest to the rating.

Are compatible cartridges a safe choice for a printer this age?

Yes — the compatible units on this page are built to the cartridge's original specifications and carry a 1-year warranty with 1-year returns, which makes them the economical way to keep a proven machine in service.

More printers that use the same cartridges

The TK-60 cartridge also serves these Kyocera models:

FS-1800, FS-1900, FS-1900N, FS-3800, FS-3800N