SKU:

CS-Kyocera-FS-1800-FS-1800N-BK

Printer Brand:

Kyocera-Mita

OEM Number:

1T02BR0US0

Ink Color:

Black

Page Yield:

Black: 20000

Printer Type:

Laser Cartridge

Condition:

New Compatible

Frequently Asked Questions

Our printer sits idle for days, then prints a huge run — is this cartridge suited to that?

Yes. The 1T02BR0US0 is rated at 20,000 pages, so a long report run barely dents it, and toner does not dry out between jobs the way liquid ink can. This single cartridge is $65.42.

Which models is it made for?

The FS-1800, FS-1800N, FS-1900, FS-1900N, FS-3800 and FS-3800N. Confirm the number on the cartridge you are replacing reads 1T02BR0US0 and you have the right item.

Will a 300-page document set come out evenly from first page to last?

It should. If the opening pages look fine and later ones fade, the cartridge is usually near empty or the toner needs redistributing — remove it, rock it gently, and reinstall. A fresh cartridge restores even output across the whole run.

Does a small office really need a 20,000-page cartridge?

Need is not the point — convenience is. At light volume this cartridge can serve for a very long time, which means toner is simply one less thing to think about or reorder.

What support do I get as a one-person office?

The same as any buyer: a 1-year warranty, free returns for a year, and a support team available Monday through Friday, 9 AM to 5 PM CST.

How is a single cartridge shipped?

From the closest warehouse among IL, PA, GA and CA. Our shipping and returns page explains delivery times and how returns work.

Our printer sometimes sits for a week. How should the cartridge be treated during idle stretches?

Mostly, left alone. The 1T02BR0US0 holds dry toner powder, which does not dry out or clog the way liquid ink does during quiet periods, so an installed cartridge waits patiently between your busy runs. Keep the printer in a normally dry room, out of direct sun, and it will be ready when the next large document set arrives. There is no maintenance cycle to run just because the machine rested.

What should I do with the spent cartridge in a one-person office?

Keep it simple: slip the empty 1T02BR0US0 into the new cartridge's bag or box, and drop it at an office-supply store's recycling bin or a municipal electronics collection on your next errand run — most accept toner cartridges without charge. Do not put it in the desk bin; the unit is bulky plastic with residual powder inside, and the recycling stream handles both properly.

What is the per-page cost of running this single cartridge?

At $65.42 against a 20,000-page rating, the 1T02BR0US0 works out to roughly 0.33 cents per page at standard coverage. For a small office printing in bursts, that is the whole toner budget for a long stretch — there is no second cartridge and no color set to factor in. Pages crowded with graphics cost a little more in practice; letters and reports land close to the figure.

Should I keep the old cartridge until the new one has proven itself?

It is a sensible habit. Set the removed 1T02BR0US0 aside — bagged, in its box — until the replacement has printed cleanly for its first days. If anything about the new unit disappoints, support can talk through the problem Monday through Friday, 9 AM to 5 PM CST, and the cartridge carries a 1-year warranty with free returns for a year. Once the new cartridge is clearly fine, the old one goes to recycling with a clear conscience.

About This Cartridge

One black Kyocera-Mita 1T02BR0US0 cartridge for the FS-1800, FS-1800N, FS-1900, FS-1900N, FS-3800 and FS-3800N — a good match for the small office whose printing comes in bursts. The 20,000-page rating shrugs off long document runs, the swap takes minutes, and the price is $65.42 with a 1-year warranty and 1-year free returns behind it.