SKU:

CS-Kyocera-FS-1800-Black

Printer Brand:

Kyocera-Mita

OEM Number:

1T02BR0US0

Ink Color:

Black

Page Yield:

Black: 20000

Printer Type:

Laser Cartridge

Condition:

New Compatible

Frequently Asked Questions

How do I make sure I am ordering the right cartridge?

Match the part number, not the printer's age or appearance. The cartridge you need is the 1T02BR0US0 — it is printed on the label of the cartridge currently in your machine and listed in the printer's supply information. This single cartridge sells for $65.42.

Which printers does this single cartridge fit?

It is made for the FS-1800 and its close relatives: the FS-1800N, FS-1900, FS-1900N, FS-3800 and FS-3800N. If your model is on that list, this is the black cartridge it uses.

What does the 20,000-page rating actually mean?

It is the yield measured under standard test coverage — ordinary office pages. Expect roughly that from letters, invoices and reports, and less when pages are packed with charts, shading or bold graphics.

Is swapping the cartridge a service call or a two-minute job?

A two-minute job. Open the cover, lift out the spent unit, seat the new one until it sits firmly, and close up. No tools and no technician; the printer is ready as soon as the cover shuts.

What if the new cartridge prints light or streaky?

First, take it out and rock it gently side to side to redistribute the toner, then print a few test pages. If the problem persists, the cartridge is protected by a 1-year warranty with free returns for a year, and support is available Monday through Friday, 9 AM to 5 PM CST.

When will my cartridge arrive?

We ship from warehouses in IL, PA, GA and CA, using whichever is closest. Timing details and return instructions live on our shipping and returns page.

How many months of printing does one of these cartridges usually represent?

It depends on the printer's workload. The 1T02BR0US0 is rated at 20,000 pages, so an FS-1800 printing 500 pages a month carries one cartridge for well over three years in theory, while a workgroup at 3,000 pages a month turns it over in about seven months. Real coverage shortens those spans on graphics-heavy work, but the division — your monthly pages into 20,000 — gives the planning number for any office.

I like buying ahead. Will a cartridge bought today still be good next year?

Yes, if it waits properly. Keep the 1T02BR0US0 sealed in its box, flat, in a dry cabinet at room temperature, away from radiators and direct sun. Toner is dry powder and does not go off the way liquid ink can, so a cartridge stored sealed holds its quality for an extended period. Leave the bag closed until installation day; there is no benefit to opening it early.

What do I do with the old cartridge once the new one is seated?

Recycle it rather than tossing it in the trash. Put the spent 1T02BR0US0 back into the new cartridge's bag or carton to contain the residual toner, and take it to an office-supply store or municipal electronics collection that accepts toner cartridges — most do. If you generate other used office consumables, batch them for a single trip. The empty is bulky plastic and powder; the recycling stream is built for both.

Is there anything I should save to make reordering foolproof?

The part number, in writing. Your outgoing cartridge's label reads 1T02BR0US0, and that exact string is what to quote or type when you order again — not the printer's age, not its appearance. Photographing the label or keeping the carton end in the supply drawer means the next purchase takes a minute and cannot drift to a look-alike cartridge for a different FS model.

About This Cartridge

A single black Kyocera-Mita 1T02BR0US0 toner cartridge for the FS-1800, FS-1800N, FS-1900, FS-1900N, FS-3800 and FS-3800N — the straightforward replacement for one printer that has run dry. It carries a 20,000-page rating, installs in minutes with no tools, and costs $65.42. A 1-year warranty and 1-year free returns stand behind it.