Phaser 4622N Toner Cartridges
Xerox designed the Phaser 4622N as the mono laser for everyday office printing, and its supply story is equally plain: the high-yield 106R01535 cartridge does the work, stocked here in compatible form and also sold under the model's own listing as the Phaser 4622N high-yield black. When a smaller fill suits the workload better, the 106R01533 standard black cartridge is the family's alternative.
The N configuration is the networked everyday printer — the one an office plugs in, shares, and then mostly forgets about until the toner light comes on. That forgettability is a design goal, and it extends to supplies: one black cartridge type, shared with a large family of Phaser models, so the office stocks a single shelf item instead of a different box for every printer.
Toner Cartridges for Phaser 4622N
| Cartridge | Color | Page Yield |
|---|---|---|
| 106R01535 | Black | High yield — see product page |
| High-yield black (Phaser model listing) | Black | High yield — see product page |
| 106R01533 | Black | Standard yield — see product page |
| 106R01535 3 Pack | Black | High yield — see product page |
| 106R01535 5 Pack | Black | High yield — see product page |
| 106R01535 Premium 5 Pack | Black | High yield — see product page |
| High-yield black 5 Pack (Phaser model listing) | Black | High yield — see product page |
Which cartridge should you buy?
Everyday office printing usually means steady rather than extreme volume, and the high-yield 106R01535 fits that pattern best: fewer swaps across the year and a lower cost per page than the standard fill, especially bought as a 3 pack or 5 pack so a spare is always in the building. The standard 106R01533 is the honest choice when the 4622N's real output is modest — a two-person office, a printer that idles most afternoons — because a smaller cartridge ties up less money for the same printed result. Notice what is not on the decision list: compatibility. Both fills are this family's cartridges, so the choice is purely about volume and stocking, never about fit.
Chip, toner and everyday use
Yields are rated at roughly 5% page coverage, which is why two offices can get very different lifespans from the same cartridge: text memos sip toner, while forms with heavy headers pour it. Replace the cartridge when print genuinely fades rather than at the first warning — a gentle side-to-side rock often restores even output for the tail of the fill. Fit the new unit until it clicks; the chip then identifies itself to the printer without further steps. Keep the next cartridge sealed, flat and indoors until its turn comes.
Frequently Asked Questions
What toner does the Phaser 4622N use?
The high-yield 106R01535 black cartridge is its main supply, with the standard 106R01533 as the smaller family option. Both are listed in the table above.
How are page yields measured?
Manufacturers rate yields at about 5% toner coverage per page. Real life varies with what you print, so treat any rating as a comparison tool between cartridges rather than a promise about your office.
When does the standard cartridge beat the high-yield?
When volume is low or irregular. A standard fill that gets used up steadily is better value than a large cartridge bought for a printer that mostly sits idle.
The printer shows a cartridge error after a swap. What should I try?
Take the cartridge out, confirm the sealing strip is fully removed, reseat it firmly until it clicks, and restart the printer. That sequence clears most chip-recognition errors.
More printers that use the same cartridges
One of the quiet advantages of this model is how many relatives share its supplies. The models that use the same cartridges as the 4622N: Phaser 4600, Phaser 4600DN, Phaser 4600DNM, Phaser 4600DT, Phaser 4600DTM, Phaser 4600N, Phaser 4600NM, Phaser 4620, Phaser 4620DN, Phaser 4620DNM, Phaser 4620DT, Phaser 4620DTM, Phaser 4620N, Phaser 4620YDNM, Phaser 4622, Phaser 4622DN, Phaser 4622DT, Phaser 4622YDNM.
