ML-1410

The Samsung ML-1410 belongs to the earliest wave of Samsung's home mono lasers — a simple, sturdy black-and-white printer from the days when a personal laser was still a novelty.

It prints with ML-1710D3 and ML-1520D3 toner cartridges. Compatible and genuine OEM options for the ML-1410 are available here.

Toner Cartridges for ML-1410

This printer works with the following toner cartridges:

• Samsung ML-1710D3
• Samsung ML-1520D3

More Samsung Printers

• ML-1500
• ML-1510
• ML-1510B
• ML-1520
• ML-1710
• ML-1710B
• ML-1710D
• ML-1710P
• ML-1740
• ML-1750
• ML-1755

Frequently Asked Questions

Could a new ML-1710D3 cartridge cause blank pages on the ML-1410?

A new ML-1710D3 can cause blank pages on the ML-1410 if its seal is intact or it is not seated, but a genuinely defective cartridge is rare. Reseat it and confirm the printer recognizes the cartridge in the supplies status. If a different ML-1710D3 prints normally, the first cartridge is the problem.

The ML-1410 worked yesterday and now the driver says it is unavailable - what happened?

Every computer needs its own driver copy, but the ML-1410 itself — ML-1710D3 cartridge included — needs no changes when machines are added. Put the same driver package on each PC and aim network installs at the printer's IP address. That keeps output consistent across the workgroup.

What's the correct way to swap out the toner cartridge in the ML-1410?

Start by peeling off any orange seals or tape from the fresh ML-1710D3, then open the ML-1410's front cover and lift the empty cartridge out by its handle. Guide the new cartridge along the side rails until it locks into place with a click, then close the cover. Finish with a test page to make sure toner is laying down evenly across the sheet.