LaserJet M880z+

Some printers live on a desk; the LaserJet M880z+ lives in the print room. It is the top configuration of HP's mid-2010s M880 Enterprise color line, built with the platform's largest paper capacity and finishing setup, and it feeds on the high-capacity 827A family: black CF300A, cyan CF301A, yellow CF302A and magenta CF303A. All four are high-yield cartridges sized for serious monthly page counts, and each color loads and empties on its own schedule.
A central machine like this one rarely serves a single user. It is the box a whole department sends reports, board packs and customer documents to, which changes how toner should be bought: the cost of an empty slot is not one person's paused job but a queue of people standing at the output tray. The listings below are all compatible cartridges built for the M880 platform, sold singly for spot replacements and in multi-packs for the supply cabinet.
Toner Cartridges for LaserJet M880z+
| Cartridge | Color | Page Yield |
|---|---|---|
| CF300A | Black | See product page |
| CF301A | Cyan | See product page |
| CF302A | Yellow | See product page |
| CF303A | Magenta | See product page |
| CF300A — 2 Black Set | Black | See product page |
| CF300A — 3 Black Set | Black | See product page |
| CF300A — 5 Black Set | Black | See product page |
| 827A 4 Color Set | Black + CMY | See product page |
| 827A 5 Color Set | Black + CMY | See product page |
| 827A 8 Color Set | Black + CMY | See product page |
| 827A 3 Color Set (CMY) | CMY | See product page |
| 827A 6 Color Set (CMY) | CMY | See product page |
The same four cartridges are also stocked under listings that carry this model's own name: M880z+ Black (CF300A), M880z+ Cyan (CF301A), M880z+ Magenta (CF303A), M880z+ Yellow (CF302A) and the M880z+ 4 Color Set — the same 827A cartridges, labeled for this machine.
Which cartridge should you buy?
Start with how the machine is actually used. On a shared Enterprise unit, black almost always empties first, because everyday office output is mostly text; the black multi-packs above exist for exactly that pattern and keep cost per page down without tying up cash in colors you will not touch for months. Colors are better bought as singles, replaced one at a time as each runs dry — there is no prize for swapping a half-full cyan. The full color sets make sense at install time, after a long color-heavy project, or when several slots report low together. Every compatible cartridge here carries a 1-year warranty and 1-year returns, so a cabinet stock-up is not a gamble.
Chip, toner and everyday use
Each cartridge carries the chip the M880 platform expects, so the panel reads levels normally and a fresh unit is recognized on the first close of the door. Pull the sealing tape fully before installing, seat the cartridge until it clicks, and let the machine run its short calibration before judging the first page. Yield figures in this family are estimates at 5% page coverage; dense graphics and full-bleed color work will land well below them, which is normal rather than a fault. Spares keep best sealed, upright and at room temperature, away from the heat a busy print room generates near the finishing units.
Frequently Asked Questions
What toner does the LaserJet M880z+ need?
Only the four 827A codes listed above — one black and three colors. Nothing from the smaller LaserJet lines fits this platform, so order by the code on the cartridge you are pulling out and the match is guaranteed.
Can I replace just one color at a time?
Yes. The four slots are independent, so a faded yellow is fixed with a yellow alone. The supplies screen names the slot that is actually low; trust it over guesswork based on how a page looks.
Why stock black in multi-packs for this machine?
Because a department printer that stops for toner stops everyone's work, and black is the slot that empties first. A two-, three- or five-black set on the shelf turns a toner-out event into a two-minute swap instead of a delivery wait.
How long can I keep spare cartridges on the shelf?
Unopened cartridges keep well for a year or two in normal room conditions. Buy what this machine will realistically use in that window rather than a decade's worth, and rotate the oldest box to the front.
More printers that use the same cartridges
The M880 platform shares its 827A cartridges across the whole line, so the same four codes also serve these models: HP 827A, LaserJet M880, LaserJet M880z, LaserJet M880z+ NFC.
