Hewlett Packard
CS Compatible Replacement for HP M426FDN-MICR Toner Cartridges Black (CF226X)
- Page Yield:
- Black: 9000
- Availability:
- In Stock
- Shipping:
- Free Shipping
- Page Yield:
- Black: 9000
- Availability:
- In Stock
- Shipping:
- Free Shipping

/>

Clever Supplies brand products are made in the USA! Why pay more for cheaper product with a high defective rate? You will end up having to send it back to the manufacturer. Your time is valuable. Get a quality product that you KNOW will work. Purchase the Clever Supplies Compatible for HP M426FDN-MICR (CF2M426FDN), Black MICR Toner Cartridge and experience the difference! All Clever Supplies brand products are backed by '100% Quality Satisfaction' 1 year warranty against defects in materials and workmanship for all toner products. Free tech support for any problems for all Clever Supplies brand products. The use of Clever Supplies brand replacement laser toner cartridges and supplies does not void printer warranty. Premium Quality Replacement Toner Cartridge is made by ISO9001 Certified Factory to Meet or Exceed OEM Standards. These units are manufactured 100% brand new with all new parts including OPC drums, wiper blades, a smart chip and other internal parts, they are an economical alternative to expensive OEM CF2M426FDN, Compatible Toner Cartridges. The Compatible Toner Cartridges will produce the same amount of page yield as an OEM cartridge would. This is a Compatible for HPM426FDN-MICR Toner Cartridges Black guaranteed to perform with HP Laser Printers. It replaces the original HP M426FDN-MICR toner cartridges Black. The compatible replacement for CF2M426FDN. The use of compatible replacement Cartridges and supplies does not void Printer Warranty. Our Compatible for CF2M426FDN. Cartridge is a replacement for OEM HP . We offer a 100% Quality Satisfaction Guarantee on our Compatible for CF2M426FDN Laser Toner Cartridges and supplies. For use in the following printers: LaserJet Pro M402, M402DN, M402D, M402DW, LaserJet Pro MFP M426FDN, M426FDW
This one: the CF226X in its MICR build. The part number is the same family the machine uses for everyday black printing, but the toner inside this version carries iron oxide, giving the routing line on a check a magnetic signal that bank readers can process. Confirm "MICR" is on the box before installing — the standard version prints the line without the magnetism.
Swap with intent. Standard cartridge out, MICR cartridge in, check stock loaded, run printed and collected — then the MICR cartridge goes back into its labeled box and the standard cartridge goes back into the machine. On a multifunction device that everyone uses, the swap-back is the step that protects you twice: it keeps MICR toner from being spent on memos, and it keeps a check run from ever starting on the wrong cartridge.
You can — a photocopy does not need magnetic toner, so the copy will look right. Most offices still swap back first, simply so the MICR cartridge is only ever consumed by actual checks. Note that scanning a copy for your records uses no toner at all, which makes the M426fdn's scanner the cheapest way to archive issued checks.
Print a small test batch on your actual check stock and ask your bank to pass the sheets through its reader. That read is the only meaningful proof: acceptance depends on the toner signal, the stock, and your software's line placement together, and no cartridge maker can guarantee a bank's verdict. Repeat the test after every cartridge change.
Only through the shared cartridge. Incoming and outgoing fax pages print with whatever cartridge is installed, so a fax that arrives mid-afternoon can quietly spend MICR toner — one more reason the MICR cartridge should live in the machine only for the length of a check run. Scanning and copying follow the same logic: copies consume toner, scans consume none.
The rating is 9,000 pages, and check pages are light coverage, so a disciplined office gets a long run of checks from one unit. Judge the end by signal rather than count: when a test check reads weakly at the bank, the cartridge has finished its check life even if the MFP could still push ordinary pages out of it.
By keeping the change off payroll day entirely. Hold a sealed spare, and when the installed CF226X is getting low, swap it in a quiet gap between runs — then the test batch and the bank's read happen without a deadline pressing. With a 9,000-page rating the change is a rare event, so planning it costs little; what it buys is that the MFP is never opened up on the morning the checks must go out.
This listing is the CF226X — the high-yield MICR, rated at 9,000 pages. The family also has a standard-yield MICR in the CF226A, which fits the same M426fdn and prints the same magnetic line but runs out sooner. If your office fitted the X for its longer service, check for the X in the code when you reorder; ordering the A by mistake still prints checks, just for a shorter stretch than you planned.
Sealed in its box, flat, in a dry cabinet — and labeled on the outside as MICR. An MFP's supply shelf holds cartridges for several jobs, and the standard and MICR units for this machine share a family look. The external label is what lets anyone stocking the shelf, not just the person who ordered it, put the CF226X in the right place and reach for the right box on check day.
Box it in the packaging its replacement arrived in and mark the box as a used MICR cartridge before it goes to the office's cartridge collection for recycling or return. On a multifunction machine, empties from many jobs accumulate together; a marked box keeps the finished check cartridge distinct from standard empties and stops it being mistaken for a usable spare. The closed box also keeps any remaining toner residue contained.
Priced at $167.13, this compatible CF226X MICR cartridge is built for the LaserJet Pro MFP M426fdn, the HP multifunction machine that often has to be both the office workhorse and the check printer. Its magnetic toner is rated at 9,000 pages; what makes it work in an MFP is not the hardware but the habit around it — a deliberate swap in, an attended run, and a swap back out.
Warehouses in Illinois, Pennsylvania, Georgia and California hold stock, a 1-year warranty applies, and 1-year free returns are covered on our shipping and returns page. Our support team is available Monday through Friday, 9 AM to 5 PM CST.