Hewlett Packard
CS Compatible Replacement for HP M402D-MICR Toner Cartridges Black (CF226X)
- Page Yield:
- Black: 9000
- Availability:
- In Stock
- Shipping:
- Free Shipping
- Page Yield:
- Black: 9000
- Availability:
- In Stock
- Shipping:
- Free Shipping

/>

Clever Supplies brand products are made in the USA! Why pay more for cheaper product with a high defective rate? You will end up having to send it back to the manufacturer. Your time is valuable. Get a quality product that you KNOW will work. Purchase the Clever Supplies Compatible for HP M402D-MICR (CF2M402D), Black MICR Toner Cartridge and experience the difference! All Clever Supplies brand products are backed by '100% Quality Satisfaction' 1 year warranty against defects in materials and workmanship for all toner products. Free tech support for any problems for all Clever Supplies brand products. The use of Clever Supplies brand replacement laser toner cartridges and supplies does not void printer warranty. Premium Quality Replacement Toner Cartridge is made by ISO9001 Certified Factory to Meet or Exceed OEM Standards. These units are manufactured 100% brand new with all new parts including OPC drums, wiper blades, a smart chip and other internal parts, they are an economical alternative to expensive OEM CF2M402D, Compatible Toner Cartridges. The Compatible Toner Cartridges will produce the same amount of page yield as an OEM cartridge would. This is a Compatible for HPM402D-MICR Toner Cartridges Black guaranteed to perform with HP Laser Printers. It replaces the original HP M402D-MICR toner cartridges Black. The compatible replacement for CF2M402D. The use of compatible replacement Cartridges and supplies does not void Printer Warranty. Our Compatible for CF2M402D. Cartridge is a replacement for OEM HP . We offer a 100% Quality Satisfaction Guarantee on our Compatible for CF2M402D Laser Toner Cartridges and supplies. For use in the following printers: LaserJet Pro M402, M402DN, M402D, M402DW, LaserJet Pro MFP M426FDN, M426FDW
One ingredient: iron oxide. This CF226X is the MICR build of the 26X family, and its toner is magnetic, so the E-13B numbers along the bottom of a check can be read by bank sorting equipment. Your report cartridge prints the same line in ordinary toner — visually identical, magnetically silent. The two cartridges are not interchangeable for check work even though they fit the same machine.
Not for the check itself — the MICR line goes down on one face of the page exactly as your software sends it. Where the duplexer earns its keep is the paperwork around the run: two-sided check registers, stub copies and remittance summaries. Keep the distinction in mind when you plan a run: check stock itself always feeds as a one-sided job.
Give check stock its own tray if your setup allows it, and load it only when a run is about to happen. Blank checks are effectively cash paper; keeping them out of the everyday tray also prevents the classic accident of a long report printing across a sheet of checks. When the run ends, the leftover stock goes back into locked storage.
Every time the cartridge changes, and before the first run on a new box of check stock. Print a few test checks, then have your bank pass them through its reader. We cannot guarantee any bank will accept your checks, because acceptance also rests on your stock and software alignment, so the bank's read on a test batch is the only real confirmation.
It can — MICR toner prints ordinary black pages perfectly well. The question is economy: every register page spends magnetic toner that only a check actually needs. Most offices swap to a standard cartridge for paperwork and keep the MICR unit sealed for checks, but if your register volume is small, printing them on the MICR cartridge does no harm to the machine.
Watch the signal, not just the page count. The rating is 9,000 pages, but a cartridge near empty lays down a weaker magnetic line before pages start looking obviously pale. If a test check reads weakly at the bank, retire the cartridge from check work at that point rather than trying to stretch it through one more payroll.
With the check stock, under the same lock. Blank checks are effectively cash paper, and the CF226X that prints them deserves the same treatment: sealed in its carton, indoors away from heat and sunlight, and apart from your standard cartridges so no one can grab the magnetic unit for a report run — or worse, fit a standard unit for checks. Toner keeps indefinitely in storage; what storage discipline protects here is the separation between the two fills.
At $167.13 over a 9,000-page rating, the arithmetic lands near two cents of toner per page — and a check, a few lines plus the E-13B strip, spends less than a standard page, so the real cost per check is lower still. Set against the cost of a rejected run — reprints, bank handling, a delayed payroll — the cartridge's price is the small number in the picture, which is why stretching a weakening unit is false economy.
Earlier than instinct suggests: when the supplies reading first falls, not when a test check reads weakly. By the time the bank's reader reports a thin magnetic line, the cartridge is already past check duty, and payroll dates do not move to accommodate a delivery. Ordering at the first low signal keeps a sealed spare in the locked cabinet, and the changeover — with its fresh test batch to the bank — happens on your schedule.
Box it in the replacement's carton and mark it plainly as spent MICR before it leaves through your consumables route. The label is not bureaucracy: a retired magnetic unit that still prints dark text looks identical to a working spare, and its weakness only shows at the bank's reader. Marking it at removal is the one moment the distinction is certain, and it closes the loop on the separation that check printing depends on.
This compatible MICR cartridge is the CF226X made for the LaserJet M402d, the duplex member of the HP LaserJet Pro M402 line, and it costs $167.13. The run-day routine it supports is simple: check stock in its own tray, a test batch to the bank after every cartridge change, and magnetic toner — rated at 9,000 pages — that exists for the single line your bank reads by machine.
It ships from our warehouses in Illinois, Pennsylvania, Georgia and California and is backed by a 1-year warranty plus 1-year free returns under our shipping and returns terms. Support is on hand Monday through Friday, 9 AM to 5 PM CST.
The full printer list for it: the LaserJet M402d, LaserJet M402dn, LaserJet M402dw and LaserJet MFP M426fdn. The standard-yield MICR partner is the 26A MICR cartridge for this printer line (CF226A); pack buyers start from the 26X MICR single (CF226X).