Hewlett Packard
CS Compatible Replacement for HP M426FDN-MICR Toner Cartridges Black (CF226)
- Page Yield:
- Black: 3100
- Availability:
- In Stock
- Shipping:
- Free Shipping
- Page Yield:
- Black: 3100
- Availability:
- In Stock
- Shipping:
- Free Shipping

/>

Clever Supplies brand products are made in the USA! Why pay more for cheaper product with a high defective rate? You will end up having to send it back to the manufacturer. Your time is valuable. Get a quality product that you KNOW will work. Purchase the Clever Supplies Compatible for HP M426FDN-MICR (CF2M426FDN), Black MICR Toner Cartridge and experience the difference! All Clever Supplies brand products are backed by '100% Quality Satisfaction' 1 year warranty against defects in materials and workmanship for all toner products. Free tech support for any problems for all Clever Supplies brand products. The use of Clever Supplies brand replacement laser toner cartridges and supplies does not void printer warranty. Premium Quality Replacement Toner Cartridge is made by ISO9001 Certified Factory to Meet or Exceed OEM Standards. These units are manufactured 100% brand new with all new parts including OPC drums, wiper blades, a smart chip and other internal parts, they are an economical alternative to expensive OEM CF2M426FDN, Compatible Toner Cartridges. The Compatible Toner Cartridges will produce the same amount of page yield as an OEM cartridge would. This is a Compatible for HPM426FDN-MICR Toner Cartridges Black guaranteed to perform with HP Laser Printers. It replaces the original HP M426FDN-MICR toner cartridges Black. The compatible replacement for CF2M426FDN. The use of compatible replacement Cartridges and supplies does not void Printer Warranty. Our Compatible for CF2M426FDN. Cartridge is a replacement for OEM HP . We offer a 100% Quality Satisfaction Guarantee on our Compatible for CF2M426FDN Laser Toner Cartridges and supplies. For use in the following printers: LaserJet Pro M402, M402DN, M402D, M402DW, LaserJet Pro MFP M426FDN, M426FDW
Yes — printing checks is a print job, and the MFP handles it like any other, provided the cartridge is a MICR one. This listing is that cartridge for the M426fdn: the CF226, the 26A cartridge filled with magnetic check toner. Scanning and copying carry on as normal; only the print side matters for checks.
Usually by keeping the routine simple: blank check stock stays locked away, comes out for the scheduled run, and goes back afterward. Because the same machine does everyday copying and printing, that little bit of ceremony keeps check paper and check toner from being casually consumed by ordinary jobs. It also helps to keep the MICR cartridge itself in a labeled box when the standard cartridge is in the machine, so nobody has to guess which toner is currently fitted on check day.
No. It cannot honestly be guaranteed for any MICR cartridge, because the bank reads the finished check — printer, stock, software and toner together. Print a small test batch first and have your bank confirm it scans properly before you print checks that matter.
Up to 3,100 pages. In check terms that is a substantial number of payroll or supplier payments between cartridge changes.
One sealed CF226 MICR cartridge for the M426fdn's black slot. The listing is for the cartridge alone; check stock and accounting software are separate, as they are with any setup.
A 1-year warranty with 1-year free returns covers a faulty cartridge, and support is reachable Monday through Friday, 9 AM to 5 PM CST.
Count checks, not months. The CF226 is rated at up to 3,100 pages, and in check work a page is a check, so a payroll of two hundred checks a month plus a weekly payables batch still leaves a cartridge in service for a long stretch. Tally your typical month once, divide it into the rating, and you have a realistic replacement interval to order against — no guesswork, and no empty cartridge discovered on payroll morning.
A short readiness routine: check the level, load the check stock, and print one or two checks from the top of the run and look them over before releasing the batch. Weeks of ordinary copying and printing may have drawn the shared cartridge down further than anyone remembers. Two minutes at the start of the run confirms the CF226 is ready for the whole batch, not just the first page.
Reorder from the code on the cartridge box — CF226, MICR version — and keep that box on file by the machine until the replacement arrives. The M426fdn also runs a standard cartridge with the same fit, and on a shared machine whoever orders may not be whoever prints the checks. The box removes the ambiguity: the replacement ordered is the magnetic one, every time, whoever places the order.
It goes into the replacement's box, marked as used MICR, and out with the office's cartridge collection for recycling or return. On an MFP that everyone uses, that small marking habit matters: a drained check cartridge left loose looks exactly like the spare someone might grab during a busy morning. Boxed and labeled, there is no mistaking it, and the toner residue stays inside the packaging where it belongs.
This MICR cartridge is made for the LaserJet Pro MFP M426fdn and appears in our HP catalog for offices that print their own checks. Using the MFP for checks also means the same machine can scan the completed, signed copies straight back into your records — a small workflow bonus that dedicated single-function check printers do not offer. It is dispatched from Illinois, Pennsylvania, Georgia or California, and our shipping and returns page carries the delivery and returns details.