imageRUNNER Advance C355iFc

At roughly 68 kg with full finisher options supported, the imageRUNNER Advance C355iFc is the heavy-duty take on Canon's 35-ppm desktop color MFP — fax built in, finishing accessories on the menu, and a chassis that behaves more like floor-standing hardware. Its supply list stays family-simple, though: the GPR-51 range (also written GPR51), with black handled by GPR51BK at 19,000 pages and GPR-51C cyan, GPR-51M magenta and GPR-51Y yellow each rated at 21,500 pages, swapped one cartridge at a time.
Finishing changes the work this machine does. Stapled report sets, sorted presentation packs and booklet jobs mean longer runs and more pages per job than a walk-up copier sees, so the C355iFc's toner consumption per week usually outpaces its lighter siblings even at the same 35-ppm rating. It anchors repro corners, print rooms and busy administrative hubs where output has to arrive collated, not just printed.
Toner Cartridges for imageRUNNER Advance C355iFc
| Cartridge | Color | Page Yield |
|---|---|---|
| GPR-51 4 Color Set | Black + C/M/Y | See product page |
| GPR-51BK Black | Black | 19,000 pages |
| GPR-51Y Yellow | Yellow | 21,500 pages |
| GPR-51BK Black 2 Pack | Black | 19,000 pages per cartridge |
| GPR-51C Cyan | Cyan | 21,500 pages |
| GPR-51 5 Color Set | Black + C/M/Y | See product page |
| GPR-51M Magenta | Magenta | 21,500 pages |
| GPR-51BK Black 3 Pack | Black | 19,000 pages per cartridge |
| GPR-51 8 Color Set | Black + C/M/Y | See product page |
| GPR-51BK Black 5 Pack | Black | 19,000 pages per cartridge |
| GPR-51 3 Color Set (colors only) | C/M/Y | See product page |
| GPR-51 6 Color Set (colors only) | C/M/Y | See product page |
Which cartridge should you buy?
Long finishing runs punish an empty slot mid-job, so this model rewards keeping depth on the shelf: black in the 3 Pack or 5 Pack, and one spare of each color within reach. The 5 Color Set and 8 Color Set suit scheduled full refreshes before a heavy production period, while the color-only 3 Color Set and 6 Color Set restock the color bank without touching black. Buy singles only for the unplanned single-color shortfall. Every compatible option listed here is backed by a 1-year warranty and 1-year returns.
Chip, toner and everyday use
Chip recognition matters most on a machine like this: the panel's per-slot estimates are how a print-room operator plans cartridge changes between jobs, and these compatible units report correctly once seated. Change cartridges between runs rather than mid-set, rock each new unit gently first, and remember that ratings are measured at roughly 5% coverage — a stapled color report can carry three times that on its cover pages. Keep the next black where the finisher operator can reach it without leaving the room.
Frequently Asked Questions
Does the finisher change which cartridges the C355iFc uses?
No. Finishing is output handling, not a different engine. The C355iFc runs the same GPR-51 family as the rest of the desktop group: GPR-51BK black and GPR-51C, GPR-51M and GPR-51Y in color.
Why does this model seem to use toner faster than a C355i?
The engine rating is the same, but finishing work means longer, denser jobs — full reports instead of single pages. More pages per job at higher coverage simply moves the same cartridges faster.
Which pack size fits a print-room C355iFc?
Most operators keep black in the 3 Pack or 5 Pack and a spare of each color nearby. Mid-job shortages cost more in reprints than the modest planning of a deeper shelf.
Can I swap a cartridge while a finishing job is queued?
Swap between jobs. A cartridge change pauses output, and interrupting a stapled set risks a mismatched run; the panel warning gives enough notice to finish the current set first.
More printers that use the same cartridges
The heavier chassis shares its toner with the rest of the group: imageRUNNER Advance C255iF, imageRUNNER Advance C355i, imageRUNNER Advance C355iF, ImageRunner Advance C250IF, ImageRunner Advance C350IF, imageRUNNER Advance C255i.
