WorkCentre 4150X

The Xerox WorkCentre 4150X is the configuration of the 4150 family built for higher-volume floors: a monochrome laser multifunction whose X package bundles extra paper capacity and finishing options for environments that push a lot of documents through one machine. All that throughput runs on the 006R01275 cartridge, stocked here as a single and in multipacks sized for heavier use.

Capacity and finishing only pay off while the machine keeps moving, and on a high-volume unit toner is a consumable you plan around rather than react to. The 4150X drinks from the same 006R01275 well as every other 4150, so a busy floor can standardize its shelf on one code even when the machines themselves are configured differently.

Toner Cartridges for WorkCentre 4150X

Cartridge	Color	Page Yield
006R01275	Black	See product page
006R01275 3 Pack	Black	See product page
006R01275 5 Pack	Black	See product page
006R01275 Premium 5 Pack	Black	See product page
WorkCentre 4150X (single)	Black	See product page
WorkCentre 4150X 5 Pack	Black	See product page

Which cartridge should you buy?

Volume should drive the choice. A single 006R01275 cartridge is the right buy for a trial or a quiet month, but a 4150X in regular heavy service is better matched to the 3 Pack or 5 Pack listings — fewer orders, a spare always in reserve, and no pause while a delivery is in transit. The Premium Quality 5 Pack covers the same ground in a premium listing. The WorkCentre 4150X cartridge and its companion 5 Pack sell the same cartridge under the model's name for buyers who prefer to order by machine. Every route leads to the same 006R01275 cartridge in the tray.

Chip, toner and everyday use

Finishing hardware and full paper trays do not help if the toner runs out halfway through a long job, so check the toner gauge before queuing big runs. When a cartridge is changed, seat it fully so the machine reads its chip and reports levels correctly. Rated yields are calculated at about 5% page coverage; long, dense documents will use toner noticeably faster. Store spares flat, sealed and out of direct sunlight, so a cartridge that may sit for months is still in perfect condition when its turn comes.

Frequently Asked Questions

What toner fits the WorkCentre 4150X?

The Xerox 006R01275 black cartridge — the same code used across the WorkCentre 4150 family. This page lists it as a single cartridge and in 3 Pack, 5 Pack and Premium 5 Pack listings.

Does the X configuration need a different cartridge from the standard 4150?

No. The X package changes paper capacity and finishing, not the toner. A 006R01275 cartridge bought for any 4150-family machine fits the 4150X.

Which listing suits a high-volume 4150X best?

The 5 Pack listings are the natural fit for sustained volume: they cut reorder frequency and keep a reserve on the shelf. Lighter users can start with a single and move up as the machine's appetite becomes clear.

How do I change the cartridge?

Open the front cover, pull the spent 006R01275 out, unpack the new cartridge and slide it in until it locks. Close the cover and let the machine recognize the cartridge before sending the next job.