null

0

Your cart is empty

DNI

Xerox Phaser 3330 Dni

The Phaser 3330 DNI is a monochrome laser printer with duplex printing and network connectivity built in — a practical machine for a shared desk or a small team corner. It is fed by a single supply, the extra-high-capacity 106R03624 black cartridge, rated at roughly 15,000 pages. That rating is the point of this configuration: a printer several people rely on should not be the one constantly waiting on a cartridge delivery, and the listings below stock that cartridge singly and in packs of two, three, five and ten.

For a shared printer, cartridge changes are interruptions multiplied by everyone who uses it. A 15,000-page cartridge stretches the interval between those interruptions further than the standard cartridges fitted to smaller machines, so the 3330 DNI suits desks where printing is steady all day — invoices, pick lists, contracts and reports — rather than occasional. One cartridge design, one reorder code, and a long runway between swaps is the whole supply story here.

Toner Cartridges for the Phaser 3330 DNI

CartridgeColorPage Yield
106R03624 — single cartridgeBlack15,000 pages
106R03624 — 2 packBlack15,000 pages
106R03624 — 3 packBlack15,000 pages
106R03624 — 5 packBlack15,000 pages
106R03624 — 10 packBlack15,000 pages

Which cartridge should you buy?

There is one cartridge for this printer — the 106R03624 — so the decision is about quantity, not capacity tiers. A single cartridge already covers a long stretch of shared-desk printing, and many offices simply keep one spare so a change never waits on shipping. The 2 and 3 packs lower the per-cartridge cost for teams that print heavily, while the 5 and 10 packs are fleet orders for sites running several machines from the same family. Because yield is rated at 5% page coverage, dense text documents will land below the headline figure; plan spares around your real monthly volume rather than the rating alone.

Chip, toner and everyday use

The cartridge carries a chip the printer reads to confirm the supply and track the toner level, so fit it fully until it clicks and let the machine recognize it before the first job. Before fitting, rock the new cartridge gently from side to side to loosen the toner inside — this evens out the first pages. When output turns light near the end of a cartridge, the same rocking trick can recover a little extra life while the replacement is on its way. Keep the spare cartridge sealed in its bag; an opened cartridge stored in a bright or damp spot will not print as well when its turn comes.

Frequently Asked Questions

What toner does the Phaser 3330 DNI use?

It uses the Xerox 106R03624 black toner cartridge, the extra-high-capacity supply for this model. Match that code when you reorder and you cannot pick the wrong cartridge.

How many pages does the 106R03624 print?

Approximately 15,000 pages at 5% coverage. Real yield depends on what you print — pages of dense text use more toner per sheet than memos with wide margins — so treat the rating as a comparison figure rather than a guarantee.

Is there a smaller standard-capacity cartridge for this printer?

Not among the cartridges stocked for this model. The 106R03624 is the cartridge this page carries, in five pack sizes; choosing between them is a matter of how many spares you want on hand, not of yield.

Does the same cartridge fit the WorkCentre 3335 and 3345?

Yes — the 106R03624 is the shared cartridge for the Phaser 3330 and the WorkCentre 3335 DNI and WorkCentre 3345 DNI configurations, which is why one stock can serve a mixed group of these machines.

More printers that use the same cartridges

The 106R03624 cartridge is shared by these Xerox models: Phaser 3330, WorkCentre 3335, WorkCentre 3345, WorkCentre 3335 DNI, WorkCentre 3345 DNI.

SELECT YOUR PRINTER FAMILY TO SHOP DNI PRODUCTS