FS-6530MFP

The FS-6530MFP is Kyocera's 30-class departmental multifunction: printing, copying, scanning and faxing in one cabinet, at a pace meant for a machine whose queue never really empties during the working day. Departmental ID management helps allocate printing costs across the teams that share it, and the whole operation runs on one black supply, the TK-477 cartridge, also written TK477 and sold under Kyocera part 1T02K30US0. Each cartridge is rated for roughly 15,000 pages, so even at departmental volume the supply closet stays simple.

Machines like this are bought by organizations, and organizations feel toner as a logistics problem, not a shopping problem. The FS-6530MFP keeps that problem small twice over: the cartridge is long-lived, and it is shared with the FS-6525MFP and a wider family of Kyocera and TASKalfa machines, so a facilities manager can hold one stock line for several devices and let cost allocation, not cartridge hunting, be the paperwork. When the queue is a department's worth of people, the value of a supply that only needs attention every fifteen thousand pages is measured in meetings that never happen about a stopped printer.

Toner Cartridges for FS-6530MFP

Which cartridge should you buy?

Every listing above is the same TK-477 cartridge; the two naming styles, full Kyocera part number and short TK477 name, describe one identical black toner for this MFP. The buying decision is therefore about stock depth. A single FS-6530MFP working at departmental pace still gets roughly 15,000 pages from one cartridge, so a single plus a spare covers most offices. Sites running this machine alongside an FS-6525MFP or other family models should buy the 3, 5 or 10 packs and pool the reserve, since the cartridge serves them all and pooled stock never strands a spare on the wrong shelf. There is no higher-yield upgrade to wait for; the standard cartridge is already the long-life one.

Chip, toner and everyday use

The cartridge chip reports remaining toner to the panel, which matters more on a shared departmental machine than anywhere else: the warning is the whole department's cue to check the reserve, not one person's problem. Yield is rated per ISO/IEC 19752 at about 5% coverage, so copy-heavy departments producing dense originals will cycle cartridges faster than the headline figure while print-light floors will match it. Keep at least one sealed spare in the cabinet beside the machine, store it flat and away from heat, and install replacements promptly when the old cartridge is spent so the queue never waits on a delivery. Compatible cartridges here carry a 1-year warranty and 1-year returns.

Frequently Asked Questions

What toner fits the FS-6530MFP?

The TK-477 black toner cartridge, Kyocera part 1T02K30US0, rated for approximately 15,000 pages. It is the machine's only supply.

Can I share cartridges between the FS-6525MFP and FS-6530MFP?

Yes. The FS-6525MFP and the FS-6530MFP use the identical TK-477 cartridge, so one stock of spares honestly serves both machines.

How many pages will I get in practice?

Around 15,000 pages at roughly 5% coverage. Dense graphics and high-coverage documents yield fewer pages, while ordinary office text and forms land close to the rating.

Does this MFP take color toner as well?

No. The FS-6530MFP is a monochrome departmental machine; its printing and copying run on the single black TK-477 cartridge, and color never enters the supply list.

More printers that use the same cartridges

The TK-477 cartridge is shared with these Kyocera and Copystar models: CS255, CS305, FS-6025, FS-6030, FS-6525MFP, TASKalfa 255, TASKalfa 305.