FS-1135 MFP

Kyocera FS-1135 MFP printer

One step up in Kyocera's compact MFP line, the FS-1135 MFP handles the same print, copy, scan and fax workload as its 1035-series relatives while leaning on the ECOSYS drum's long service intervals. It shares their toner platform outright: the TK-1142 (TK1142) black cartridge, rated at 7,200 pages per ISO/IEC 19752 and documented by Kyocera under the TK-1147 name (TK-1140 in Europe). Standardizing on this machine means standardizing on a cartridge half the office may already stock.

The ownership math is the draw. Fewer interventions, a drum built for long service, and a cartridge that lasts about 7,200 pages add up to a lower total cost of ownership for offices that print steadily all week. Nothing about the supply routine changes when volume grows — the same box, the same swap, just a machine aimed a notch higher in the range.

Toner Cartridges for FS-1135 MFP

TK-1142 (TK1142) — Black, 2 pack, 7,200 pages per cartridge
TK-1142 (TK1142) — Black, 4 pack, 7,200 pages per cartridge

Which cartridge should you buy?

Both listings hold the same TK-1142 cartridge, so decide by consumption speed. A 2 pack — two cartridges, around 14,400 pages in total — fits a single department that prints in a steady rhythm. The 4 pack, at roughly 28,800 pages of coverage, is the fleet choice: sites running several machines from this family can draw every replacement from one purchase, at a lower cost per page, and stop tracking which office ordered last.

Chip, toner and everyday use

The cartridge's chip reports itself to the FS-1135 MFP on installation, letting the panel track remaining toner; seat the cartridge fully and confirm the machine accepts it before walking away. Yield ratings rest on about 5% coverage, so a day of dense contracts uses visibly more toner than a day of short emails — plan reserves around your heaviest work, not your lightest. If a nearly spent cartridge starts printing light, rocking it gently side to side can buy back some even pages. Spares keep best sealed, flat and at room temperature.

Frequently Asked Questions

Which toner does the FS-1135 MFP use?

The TK-1142 black toner cartridge in North America — Kyocera's TK-1147 kit, TK-1140 in Europe — rated at approximately 7,200 pages per ISO/IEC 19752.

Does the FS-1135 MFP use the same toner as the FS-1035 MFP?

Yes. The FS-1035 MFP and this model draw from the same TK-1142 shelf, as do their FS-1035MFP counterparts — cartridges move freely across the family.

What does the ECOSYS design change about maintenance?

Kyocera pairs the toner with a long-service drum, so routine attention centers on the toner cartridge rather than a calendar of parts swaps — one reason these machines post low running costs.

How many pages should I expect from one cartridge?

Plan around the 7,200-page rating at roughly 5% coverage, and expect less on coverage-heavy work. The 2 pack and 4 pack simply multiply that figure by the cartridge count.