FS-1035 MFP

Kyocera FS-1035 MFP printer

The FS-1035 MFP packs print, copy, scan and fax into one compact monochrome multifunction sized for a small office desk — and it keeps the supply list equally small. US stock for this machine is the TK-1142 (TK1142) black toner cartridge, rated at 7,200 pages per ISO/IEC 19752. Kyocera's own compatibility documentation ties this model to the same kit it lists as the TK-1147 (TK-1140 in Europe), so the cartridge you order here under the TK-1142 name is the documented supply for the printer.

The appeal is fewer headaches per page. Instead of nursing an entry-level machine through frequent cartridge swaps, a small team gets a 7,200-page runway between changes and one box that handles the full document cycle. For an office that prints steadily but has no IT bench to lean on, that combination — multifunction convenience plus a long interval between interventions — is the entire argument.

Toner Cartridges for FS-1035 MFP

Cartridge	Color	Page Yield
TK-1142 (TK1142) — 2 pack	Black	7,200 pages per cartridge
TK-1142 (TK1142) — 4 pack	Black	7,200 pages per cartridge

Which cartridge should you buy?

This page stocks the TK-1142 in multi-packs, so the question is how deep your shelf should be. The 2 pack puts two cartridges — about 14,400 pages of coverage — in the building, which covers a small office comfortably between orders. The 4 pack doubles that to roughly 28,800 pages and lowers the cost per page; it suits offices that print daily, share the machine across several people, or simply prefer ordering supplies a couple of times a year instead of every few weeks.

Chip, toner and everyday use

Each cartridge is chipped so the FS-1035 MFP can identify it and track toner levels; install it until it clicks into place and let the machine register the new supply before a long copy run. The 7,200-page rating assumes roughly 5% coverage per page, so fax cover sheets and short memos are cheap, while dense scanned documents consume toner faster. A gentle rocking motion can redistribute toner inside a cartridge that has started to fade. Keep the next pack sealed and stored flat, and the swap itself takes minutes.

Frequently Asked Questions

Which toner does the FS-1035 MFP use?

In North America, the TK-1142 black cartridge, rated at approximately 7,200 pages. Kyocera documents the same kit as the TK-1147, with TK-1140 as the European designation.

Does the FS-1035 MFP share toner with other models?

Yes — the same TK-1142 covers the FS-1135 MFP, the M2035dn and the M2535dn, so one cartridge number can supply the whole family.

Why is there no single cartridge listed for this printer?

The shelf for this model is stocked in 2-pack and 4-pack form. Both contain the same TK-1142 cartridge; the packs simply lower the cost per page and keep a spare on site.