Lanier LD335

Small footprint, serious staying power: the Lanier LD335 sits at the compact end of Lanier's rebranded Ricoh MP copier line, a digital multifunction sized for lighter departmental duty and offices where floor space is spoken for. It works in black only, and it runs on a cartridge that seems oversized for such a modest frame — the Ricoh MP 3500 compatible 884922 black toner, rated at roughly 30,000 pages. On a machine serving a small team, that rating translates into a very long stretch between toner changes.

Machines like the LD335 usually land in satellite offices, branch locations and single departments that need real copier capability without a full-size system anchoring the room. There is rarely a dedicated administrator in those settings, so a consumable that quietly lasts tends to matter more than raw speed. One cartridge type on the shelf, months of printing and copying per install, and no mid-week scramble when a big job lands — that is the practical appeal of pairing this compact machine with a 30,000-page cartridge.

Toner Cartridges for Lanier LD335

Three ways to buy the same cartridge are listed below; pick by how much runway you want on the shelf.

Cartridge	Color	Page Yield
Ricoh MP 3500 (884922) — Single Cartridge	Black	Approx. 30,000 pages
Ricoh MP 3500 (884922) — 2 Pack	Black	Approx. 30,000 pages each
Ricoh MP 3500 (884922) — 4 Pack	Black	Approx. 30,000 pages each

Which cartridge should you buy?

Start with your monthly volume. A light-duty LD335 that copies a few hundred pages a week will take a long time to work through even one single cartridge, so buying one at a time keeps cash and shelf space free. The 2-pack suits offices that never want to think about toner at all: one cartridge goes into the machine and its twin waits in the cabinet, and the per-cartridge price drops compared with buying singly. Choose the 4-pack if this machine shares supply duty with sibling models from the same family, or if your purchasing happens once a quarter — four cartridges are roughly 120,000 pages of coverage. Every option holds the identical cartridge; only the bundle size and the per-cartridge cost change.

Chip, toner and everyday use

When output starts to look washed out, take the cartridge out and rock it gently from side to side a few times; the toner inside settles during long runs, and redistributing it often restores even coverage for the remaining pages. Keep the replacement sealed in its bag until the moment you install it, and store spares in a cool, dry cabinet rather than near a window or a heater. Remember that the 30,000-page figure is measured at 5% page coverage, so dense contracts and bold graphics will use toner faster than light memos. A spare on the shelf turns a toner warning from an emergency into a two-minute task.

Frequently Asked Questions

Which toner cartridge does the Lanier LD335 take?

It takes the Ricoh MP 3500 compatible black cartridge, part number 884922, rated for approximately 30,000 pages. It is sold above as a single, a 2-pack and a 4-pack.

Are the cartridges on this page original Lanier products?

No. They are compatible replacements built to match the original cartridge's fit and page yield, and every one is covered by a 1-year warranty with 1-year returns.

How many pages will one cartridge print in real office use?

The rating is about 30,000 pages at the standard 5% coverage measurement. Everyday documents with logos, shaded tables or bold headings cover more of the page, so real-world totals land lower — still far beyond what a small department prints in a typical month.

My prints are coming out light. Is the cartridge finished?

Not necessarily. Toner settles as a cartridge empties, so removing it and rocking it gently side to side can even out the last portion. If pages stay faint after that, the cartridge is genuinely spent and it is time for the spare.