SKU:

TK-362-BK

Printer Brand:

Kyocera-mita

OEM Number:

1T02J20US0

Ink Color:

Black

Page Yield:

20,000 Pages

Printer Type:

Laser Cartridge

Condition:

New Compatible

Frequently Asked Questions

How can I be sure this cartridge matches the one coming out of my printer?

Slide the spent unit out and read the label on top of it. If it shows 1T02J20US0 or TK-362, you are holding the cartridge this listing replaces — Kyocera prints both codes for one and the same black toner unit, so matching either code is a complete check. If your old label shows a different code entirely, stop and compare before opening the new box.

What exactly do I get for $56.27?

One factory-sealed black toner cartridge, ready to install as it arrives. There is nothing to assemble and nothing else to buy: no separate drum, no adapter, no reset tool. The price on this page covers that single cartridge and the coverage described below.

What does the 20,000-page rating mean on a shared workgroup printer?

The rating is measured at the industry-standard 5% page coverage, so your real count depends on how dense your pages are. On an FS-4020DN serving a busy shared workgroup, one cartridge typically carries the printer through months of everyday reports, letters and forms before the low-toner warning appears.

How long does the swap itself take?

About two minutes, with no tools and no service call. Open the front cover, slide the empty unit straight out, pull the protective seal from the new cartridge, rock it gently from side to side a few times so the toner inside settles evenly, then push it in until it seats. Close the cover and the printer is back on the job.

The first pages after installing look faint. Is the cartridge defective?

Almost never. Toner powder settles during shipping, and the first prints can come out light on one side. Take the cartridge out, rock it side to side five or six times to redistribute the powder, and reinstall it. Print density normally evens out within the first few pages after that.

What protection comes with this purchase?

Every cartridge is covered by a one-year warranty and one-year free returns, so a genuine fault is replaced or refunded rather than argued over. Our support team answers Monday through Friday, 9 AM to 5 PM CST, and the full terms live on our shipping & returns page.

What does this cartridge cost per page at its rated yield?

The single TK-362 is $56.27 against a rated yield of 20,000 pages, which works out to about 0.28 cents per page at the standard 5% coverage the rating assumes. Denser pages — heavy forms, big graphics, bold coverage — push the real cost per page upward because each sheet draws more toner, while plain text work lands close to the rated figure. It is a handy number for comparing this cartridge against a managed-print contract quote.

If I buy this cartridge ahead of need, how should it be stored?

Exactly as it arrives: factory-sealed, in its box, lying flat in a cool dry cabinet away from direct sunlight and heat vents. A sealed toner cartridge keeps well for a long stretch stored that way, because the powder inside does not dry out or evaporate. When the FS-4020DN finally calls for it, pull the protective seal, rock the cartridge gently side to side as you would any fresh install, and it is ready to work.

What should I do with the spent cartridge that comes out?

Set it aside in the new cartridge's box until the replacement has printed cleanly for a few days, then route the empty through your office's normal toner recycling or disposal channel. Holding it briefly costs nothing and covers the unlikely case of a question about either unit. If the new TK-362 gives any trouble in that window, our support team answers Monday through Friday, 9 AM to 5 PM CST, and every cartridge carries a one-year warranty with one-year free returns.

When should I order so a shared printer never sits waiting?

Treat the low-toner warning as the ordering signal rather than waiting for output to fade. On a busy workgroup machine like the FS-4020DN the warning arrives while a useful amount of printing remains, which is the window a delivery needs. If this printer is one the whole office leans on, the more comfortable pattern is to keep one sealed TK-362 in the cabinet permanently and reorder the day that spare goes into the machine.

About This Kyocera TK-362 Black Toner Cartridge (Single)

This single-pack listing suits one printer that needs a cartridge now, not a shelf of spares. The TK-362 (1T02J20US0) was built for the FS-4020DN, Kyocera's fast workgroup laser, and this compatible version matches the original's fit and 20,000-page rated yield while costing far less than the brand-name box. It is part of our compatible Kyocera-Mita range, stocked in our warehouses in IL, PA, GA and CA so orders leave from whichever location gets it to you soonest.