BizHub 420

The BizHub 420 steps Konica Minolta's mono departmental line up in speed, for floors where black-and-white output is measured in stacks rather than pages. Faster engines are exactly where a high-capacity cartridge proves its worth, and the 420's supply is the TN-511 (TN511) — listed in Konica Minolta's own parts catalog as the 024E. The compatible cartridges on this page keep the 420's running cost proportional to its output, not to its pace.
A fast departmental machine concentrates an office's printing into one queue, which makes its consumable the floor's single point of failure. The 420 rewards the offices that treat toner as inventory rather than an emergency purchase: a cartridge in the machine, a spare beside it, and a reorder triggered by the low warning rather than by the empty stop. Its cartridge is also shared across the family, so the 420's spare shelf can serve more than one machine.
Toner Cartridges for BizHub 420
| Cartridge | Color | Page Yield |
|---|---|---|
| TN-511 (024E) — Single Cartridge | Black | See product page |
| TN-511 (024E) — 3 Pack | Black | See product page |
| TN-511 (024E) — Premium Quality 3 Pack | Black | See product page |
| TN-511 — Single (alternate listing) | Black | See product page |
| TN-511 — 2 Pack | Black | See product page |
| TN-511 — 3 Black | Black | See product page |
| TN-511 — 5 Black | Black | See product page |
| TN-511 — 10 Black | Black | See product page |
| TN-511 — 4 Black | Black | See product page |
Which cartridge should you buy?
For the 420, the sensible default is the 2 Pack: one cartridge working, one waiting, and a reorder placed when the spare goes in. Departments running the machine near its limits step up to the 3 Pack or the 4 Black listing, and the 5- and 10-cartridge bulk formats exist for centralized buyers who stock a whole floor. Singles remain the right call for a 420 that shares duties with other machines. The Premium Quality 3 Pack covers buyers who prefer the premium line. Every compatible TN-511 here carries a 1-year warranty and 1-year returns — check the product page for its yield rating before ordering.
Chip, toner and everyday use
Pale prints from a 420 with toner still on board usually trace to a dirty charge wire or a tiring drum, not to the TN-511 — run the machine's cleaning functions before blaming the cartridge. When you do fit a cartridge, take the seal out completely, seat the unit with a firm push, and let the machine initialize and read the chip before sending a test job. A spare kept sealed and flat in a cool place will hold its toner evenly for the whole of its shelf wait.
Frequently Asked Questions
Is one TN-511 enough to keep a BizHub 420 running, or should offices stock two?
Stock two in total: one installed, one spare. The 420's low-toner warning gives ample lead time, so a single backup almost never leaves a department stranded — but a fast machine with no spare turns a routine cartridge change into a floor-wide stop.
Why would a nearly full TN-511 produce pale prints on the BizHub 420?
Because the fault is probably not the cartridge. A dirty charge wire or a worn drum produces pale, uneven output with plenty of toner remaining. Clean first, and only suspect the TN-511 if output stays pale after the machine's cleaning routine.
Can I move a half-used TN-511 from a BizHub 421 into the BizHub 420?
Yes. The cartridge is identical across the two models — see the BizHub 421 — and a partly used unit works normally in the receiving machine; the gauge reads the cartridge's actual remaining level.
More printers that use the same cartridges
The same TN-511 cartridge serves the rest of the 420's departmental family: BizHub 360, BizHub 361, BizHub 421, BizHub 500, BizHub 501.
