Multifunction B2375dfw

The Dell B2375dfw is a multifunction laser in Dell's B-series line, and its supply story could hardly be simpler: one black cartridge does everything. That cartridge is the 593-BBBJ, sold on this page as a single and in 2, 3, 5 and 10 packs. The listings are named for the B2375DNF because the same cartridge serves both machines — the B2375 family shares a single toner slot across its variants.

A multifunction's cartridge has a harder life than a print-only machine's, because printing is only part of its workload. Copies made at the machine draw on the same 593-BBBJ, so the cartridge level reflects the office's total paper habits rather than just what arrives from computers. On a single-function printer an empty cartridge is an inconvenience; on the machine the office also copies with, it is a full stop. That asymmetry should drive how you stock this cartridge.

Toner Cartridges for Dell B2375dfw

Option	Cartridge Code	Color	Yield
One cartridge	593-BBBJ	Black	See product page
Two cartridges (2 Pack)	593-BBBJ	Black	See product page
Three cartridges (3 Pack)	593-BBBJ	Black	See product page
Five cartridges (5 Pack)	593-BBBJ	Black	See product page
Ten cartridges (10 Pack)	593-BBBJ	Black	See product page

Which cartridge should you buy?

There is one cartridge and one decision: how many to keep in the building. A single 593-BBBJ is the right buy for a lightly used machine in a home office that can tolerate a delivery wait. Everyone else should treat the 2 pack as the baseline, because it converts a cartridge change from a procurement event into a thirty-second swap, with the reorder happening afterward at leisure. The 3 and 5 packs fit offices whose copying volume arrives in waves — enrollment periods, tax season, project kickoffs — and the 10 pack is for buyers standardizing this cartridge across a small fleet of B2375-family machines. Check the product page for the current yield figure before choosing if page counts drive your budgeting; what matters day to day is that a sealed spare is always within reach of the machine.

Chip, toner and everyday use

Each cartridge carries a recognition chip, and the swap is the standard front-access routine: open the front, pull the spent cartridge straight out, and slide the new one in until it seats firmly — a cartridge that is almost seated is the most common cause of a not-recognized message, and reseating it fixes the majority of cases. Store spare cartridges sealed, flat, and away from windows and heaters, since heat and light age toner even in an unopened box. If a nearly finished cartridge starts printing light, removing it and rocking it gently side to side redistributes the toner and usually recovers respectable output for its remaining pages.

Frequently Asked Questions

Which toner cartridge does the Dell B2375dfw use?

It uses the Dell 593-BBBJ black cartridge. You will see the listings named for the B2375DNF; that is the same cartridge, shared across the B2375 family, and it is the correct supply for the B2375dfw as well.

Why do the product names say B2375DNF instead of B2375dfw?

Because Dell's B2375 variants share one cartridge design, suppliers list the cartridge under the family's best-known model name. The cartridge that fits the B2375DNF is the cartridge that fits your B2375dfw — the 593-BBBJ code is the number to match.

How many spare cartridges should I keep for a multifunction?

At least one, sealed, in the same room as the machine. A multifunction that runs dry stops copying as well as printing, so the spare is insurance for every function at once, not just one.

The printer says it does not recognize the new cartridge. What should I try?

Remove the cartridge and reinstall it, pushing it firmly home until it seats; incomplete seating is the usual culprit. If the message persists, power the machine off and back on with the cartridge installed so it re-reads the chip.