Clever Supplies brand products are made in the USA! Why pay more for cheaper product with a high defective rate? You will end up having to send it back to the manufacturer. Your time is valuable. Get a quality product that you KNOW will work. Purchase the Clever Supplies Compatible for Kyocera-Mita TK67 2 Black Toner Cartridge and experience the difference! All Clever Supplies brand products are backed by '100% Quality Satisfaction' 1 year warranty against defects in materials and workmanship for all toner products. Free tech support for any problems for all Clever Supplies brand products. The use of Clever Supplies brand replacement laser toner cartridges and supplies does not void printer warranty. Premium Quality Replacement Toner Cartridge is made by ISO9001 Certified Factory to Meet or Exceed OEM Standards. These units are manufactured 100% brand new with all new parts including OPC drums, wiper blades, a smart chip and other internal parts, they are an economical alternative to expensive OEM TK67 Compatible Toner Cartridges. The Compatible Toner Cartridges will produce the same amount of page yield as an OEM cartridge would. This is a Compatible for Kyocera-Mita TK67 Toner Cartridges Black guaranteed to perform with Kyocera-Mita Laser Printers. It replaces the original Kyocera-Mita TK67 Black. The use of compatible replacement Cartridges and supplies does not void Printer Warranty. Our Compatible for TK67. Cartridge is a replacement for OEM Kyocera-Mita. We offer a 100% Quality Satisfaction Guarantee on our Compatible for TK67 Laser Toner Cartridges and supplies. For use in the following printers: FS-3820, FS-3820N, FS-3830, FS-3830N
Frequently Asked Questions
Why would I buy two cartridges at once instead of one?
So a low-toner warning never turns into downtime. With the TK67 two-pack at $116.51, one cartridge goes into the printer today and the second stays sealed beside it; when the first runs out — even in the middle of a contract run — the swap takes two minutes and work continues.
Are the two cartridges packed as one unit or two?
Two individually sealed cartridges in one order. That matters: you can open one now and keep the other untouched for months, or put one in each of two printers — an FS-3820 and an FS-3830, for example — since every model in this family uses the same TK67.
Will the spare go stale sitting on the shelf?
Not under normal office conditions. A sealed toner cartridge stored away from heat, humidity and direct sunlight keeps for a long time because the toner inside is a dry powder — it does not dry out or expire the way liquid ink does.
How do I know both cartridges are really the TK67 and not a look-alike?
Check the part number on each box and on each cartridge label before you break the seal. Both should read TK67, the cartridge specified for the FS-3820, FS-3820N, FS-3830 and FS-3830N. Matching the number — not the shape — is the reliable check.
When should I reorder?
The day the spare goes into the printer. At that point your shelf is empty even though the machine is printing again, so ordering the next two-pack then keeps the rotation unbroken. If you only reorder after the second cartridge fades, the buffer the two-pack was bought for is gone.
If one of the two cartridges is defective, do I have to send both back?
No — coverage is per cartridge, not per box. Each unit carries the 1-year warranty and 1-year free returns, so a faulty cartridge opened months after its twin is still covered on its own; see our shipping and returns page for the process, or reach support Monday through Friday, 9 AM to 5 PM CST. We ship from IL, PA, GA and CA warehouses.
What does each cartridge in the two-pack work out to?
The two-pack is $116.51, so each TK67 inside it comes to $58.26 in the single order. That unit figure covers both halves of the rotation — the cartridge printing today and the sealed spare beside the printer — so the cost of never being caught without toner is simply the pair's price, known in advance, rather than an urgent order placed the day a machine stops.
How much printing does the pair represent in total?
Each TK67 is rated at 20,000 pages, so the two together cover 40,000 pages at standard coverage. For an FS-3820 or FS-3830 printing a few hundred pages a week, that is a long runway from one order — the first cartridge works, the second waits sealed, and the pair is only exhausted after both have run their full course in the machine.
My output is graphics-heavy — how does that change what the pair delivers?
It shortens both cartridges, predictably. The 20,000-page rating assumes standard coverage; pages carrying dense graphics, shaded forms and large filled areas draw more toner per sheet, so each unit finishes sooner than the headline figure. The useful habit is to judge the spare by the first cartridge's real life in your printer: whatever your page mix did to the first TK67, it will do much the same to the second.
How do I learn the real interval between swaps?
Write the fitting date on the working cartridge's box — or note the printer's page counter reading — when the first cartridge goes in. When it finally fades and the spare takes over, you will know exactly how many months and pages one TK67 actually delivered in your office. That evidence turns the next order into a scheduled purchase timed to your rhythm, instead of a reaction to a stopped printer.
About This Two-Pack
Two compatible black TK67 cartridges in a single order, priced at $116.51 — one to run now and one sealed spare, so a busy Kyocera-Mita FS-3820, FS-3820N, FS-3830 or FS-3830N never waits on a delivery. Each cartridge is rated at 20,000 pages, installs in about two minutes with no tools, and is backed by a 1-year warranty with free returns for a year. Buy it as a rotation: working cartridge in the machine, backup on the shelf, reorder the moment the backup is used.
See Compatible Printers
Read more about our ink!
