Frequently Asked Questions

Reds are printing orange and faces look gray — what is failing?

Almost certainly the magenta. Reds are built from magenta and yellow, so when the TK5152M runs dry the reds slide orange and skin tones go muddy. A test page settles it: a pale magenta band points straight at this cartridge, the magenta for the M6035cidn and M6535cidn.

How do I confirm this is the right cartridge before ordering?

Read the code on the unit you are pulling out. If it says TK5152M, this $35.21 cartridge is its direct replacement — the code matters more than the printer's age or trim level.

What yield should I expect from it?

It is rated at 10,000 pages at standard coverage. Photo- and graphics-heavy pages spend color faster, plain documents slower, but every TK5152M starts with the same full standard fill.

Can the swap wait until the current job finishes?

You can finish a short run — the output will simply keep drifting further from true color. For anything a customer will see, change the cartridge first; the swap takes about two minutes mid-job and the machine picks straight back up.

Is this a reduced starter cartridge?

No. It is the full-capacity standard replacement with the complete 10,000-page rating, not the smaller unit that ships inside a new printer.

What protection backs it?

A 1-year warranty with 1-year free returns — the terms are set out on our shipping & returns page. A genuine fault within the year means a free return and a replacement.

Which jobs burn through magenta faster than the rating suggests?

Photographs and warm-toned graphics. Skin tones are built largely from magenta and yellow, and reds, oranges and warm brand colors lean on magenta directly, so a run of brochures or photo pages can spend a TK5152M far faster than the same count of ordinary documents. The 10,000-page rating assumes standard coverage; a photo-heavy month is simply a different kind of page, and the cartridge empties accordingly.

I swapped the magenta mid-run — will the rest of the batch match the first copies?

Expect a visible step. Pages printed while the old TK5152M was fading carry its drift — reds sliding orange — while pages after the swap print at full strength, so a brochure run split by the change can show two slightly different reds. For customer-facing batches, the cleaner habit is to fit the new cartridge before the run starts, then print the whole batch on one cartridge's output.

Magenta fades gradually — when is the right moment to have the spare ready?

Earlier than feels necessary. Because the fade creeps — faces go slightly gray, reds lose their punch over days rather than stopping outright — the cartridge can look acceptable right up until a page someone cares about exposes it. Once a test page shows a pale magenta band, treat the TK5152M as finished and have the replacement in the building, even if routine work could limp on.

How should the spent magenta cartridge leave the office?

Back in the box its replacement came in, then out through an electronics or office-supply recycling channel instead of the general waste. If the cartridge died young or printed badly from the start, do not recycle it: that is a warranty case under the 1-year cover with free returns, and the unit itself is the evidence. Only a cartridge that delivered its full run belongs in the recycling box.

About This TK5152M Magenta Cartridge

Magenta is the color reds and skin tones are made of, which is why its fade is the one customers notice first. This TK5152M, $35.21 and rated at 10,000 pages, is the single-slot answer for the Kyocera M6035cidn and M6535cidn — fitted in minutes, it puts the reds back where they belong. From our compatible Kyocera-Mita range, shipped from our IL, PA, GA and CA warehouses, with support Monday to Friday, 9 AM to 5 PM CST.