Clever Supplies brand products are made in the USA! Why pay more for cheaper product with a high defective rate? You will end up having to send it back to the manufacturer. Your time is valuable. Get a quality product that you KNOW will work. Purchase the Clever Supplies Compatible for Kyocera-Mita TK342 Black Toner Cartridge and experience the difference! All Clever Supplies brand products are backed by '100% Quality Satisfaction' 1 year warranty against defects in materials and workmanship for all toner products. Free tech support for any problems for all Clever Supplies brand products. The use of Clever Supplies brand replacement laser toner cartridges and supplies does not void printer warranty. Premium Quality Replacement Toner Cartridge is made by ISO9001 Certified Factory to Meet or Exceed OEM Standards. These units are manufactured 100% brand new with all new parts including OPC drums, wiper blades, a smart chip and other internal parts, they are an economical alternative to expensive OEM TK342 Compatible Toner Cartridges. The Compatible Toner Cartridges will produce the same amount of page yield as an OEM cartridge would. This is a Compatible for Kyocera-Mita TK342 Toner Cartridges Black guaranteed to perform with Kyocera-Mita Laser Printers. It replaces the original Kyocera-Mita TK342 Black. The use of compatible replacement Cartridges and supplies does not void Printer Warranty. Our Compatible for TK342. Cartridge is a replacement for OEM Kyocera-Mita. We offer a 100% Quality Satisfaction Guarantee on our Compatible for TK342 Laser Toner Cartridges and supplies. For use in the following printers: FS-2020D
Frequently Asked Questions
How do I confirm TK342 is the number my printer actually needs?
Read the label on the cartridge you are about to pull out — TK342 is printed right on it, and the same code appears in the printer's supply status report. Match that code and you have the right cartridge; this single black cartridge is priced at $47.77.
What will 12,000 pages look like in a small office?
The rating comes from standard test coverage, the kind you get from letters, invoices and everyday reports. At a few dozen pages a day, one cartridge carries a one-printer office for many months; dense graphics and bold shading will use it up sooner.
Is the swap something I can do between phone calls?
Yes. Open the cover, lift the spent unit straight out, seat the new TK342 until it settles, and close the cover. It takes about two minutes, needs no tools, and the printer is ready to work as soon as the cover shuts.
The first pages out look pale. Should I send it back?
Not yet. Remove the cartridge and rock it gently from side to side to loosen and level the toner, then print several test pages — output normally evens out. If it does not, the cartridge is covered by a 1-year warranty with 1-year free returns, and our support team is available Monday through Friday, 9 AM to 5 PM CST.
What protection do I have if the cartridge turns out to be faulty?
Every cartridge we sell carries a 1-year warranty, and returns stay free for a full year as well. If a unit misbehaves, you are not stuck with it — contact support during business hours and we will make it right.
Where does my order ship from?
We keep stock in IL, PA, GA and CA and dispatch from the warehouse closest to you. Delivery timing and the full return procedure are spelled out on our shipping and returns page.
Is it worth keeping a spare TK342 when I only run one printer?
For most one-printer offices, yes. A single FS-2020D has no backup machine to fall back on, so when its cartridge ends, printing stops until a delivery arrives. A sealed TK342 on the shelf turns that into a two-minute swap, and at $47.77 the working cartridge is cheap insurance against a stalled day of invoices and correspondence.
When is the smart moment to order a replacement?
When the low-toner warning first appears. The printer flags low toner while a working reserve remains inside the TK342, so ordering at the warning — rather than waiting for visibly faded pages — gives the replacement time to arrive while the old cartridge finishes the job. Match the TK342 code on the outgoing cartridge's label and the order takes seconds.
If I buy the spare early, how should it be kept?
Sealed in its bag, lying flat in a cool, dry cabinet away from direct sunlight and heat vents. A toner cartridge stored that way keeps patiently for months — the powder inside does not dry out — so there is no penalty for buying ahead. Write the purchase month on the box and you will always know which unit is oldest.
What should I do with the empty cartridge?
Once the new TK342 has printed a few clean pages, put the spent unit into the new cartridge's bag and box and send it out through a local toner recycling route. Holding it briefly first is deliberate: if the replacement ever misbehaves in its first days, the old cartridge is still available while support sorts things out under the 1-year warranty.
About This Cartridge
This is the single black TK342 toner cartridge for the FS-2020D — the one-at-a-time replacement for a printer that has just run dry. It is a Kyocera-Mita compatible cartridge rated at 12,000 pages, priced at $47.77, and backed by a 1-year warranty with 1-year free returns.
See Compatible Printers
Read more about our ink!
