Clever Supplies brand products are made in the USA! Why pay more for cheaper product with a high defective rate? You will end up having to send it back to the manufacturer. Your time is valuable. Get a quality product that you KNOW will work. Purchase the Clever Supplies Compatible for Kyocera-Mita TK162 10 Black Toner Cartridge and experience the difference! All Clever Supplies brand products are backed by '100% Quality Satisfaction' 1 year warranty against defects in materials and workmanship for all toner products. Free tech support for any problems for all Clever Supplies brand products. The use of Clever Supplies brand replacement laser toner cartridges and supplies does not void printer warranty. Premium Quality Replacement Toner Cartridge is made by ISO9001 Certified Factory to Meet or Exceed OEM Standards. These units are manufactured 100% brand new with all new parts including OPC drums, wiper blades, a smart chip and other internal parts, they are an economical alternative to expensive OEM TK162 Compatible Toner Cartridges. The Compatible Toner Cartridges will produce the same amount of page yield as an OEM cartridge would. This is a Compatible for Kyocera-Mita TK162 Toner Cartridges Black guaranteed to perform with Kyocera-Mita Laser Printers. It replaces the original Kyocera-Mita TK162 Black. The use of compatible replacement Cartridges and supplies does not void Printer Warranty. Our Compatible for TK162. Cartridge is a replacement for OEM Kyocera-Mita. We offer a 100% Quality Satisfaction Guarantee on our Compatible for TK162 Laser Toner Cartridges and supplies. For use in the following printers: FS-1120D
Frequently Asked Questions
Who buys ten cartridges of the same code at once?
Facilities and office managers standardizing on one cartridge for a fleet of FS-1120D printers, or a single site that plans its consumables annually. Ten TK162 cartridges at $203.56 for the pack turn toner into a once-a-year line item rather than a recurring errand.
What should we check when a 10-pack delivery arrives?
Count the units and glance over the packaging before signing off. Each cartridge is sealed individually, so a proper delivery is ten intact boxes. Note any crushed packaging on the delivery record the same day — it makes any follow-up far simpler.
Can cartridges bought this year still be used next year?
Yes, with ordinary care. Sealed toner cartridges keep well for extended periods when stored flat, dry and out of direct sunlight and heat. Rotate the boxes oldest-first and the last cartridge of the ten should perform like the first.
What happens if the printers are retired while stock remains?
Unopened cartridges are covered by free returns for a year, so sealed surplus from a fleet change is not money stranded on a shelf. Opened or installed units are a different matter, which is why it pays to open boxes only as machines call for them.
Which code belongs on our purchasing paperwork?
TK162 — the exact part number printed on every cartridge label in the pack. Quoting the code on the PO keeps purchasing, receiving and the supply shelf all speaking about the same item, and it is the fastest way to verify a delivery.
Who do we contact if a cartridge in the fleet stock misbehaves?
Our support team is available Monday through Friday, 9 AM to 5 PM CST. Each cartridge carries a 1-year warranty, and orders ship from warehouses in IL, PA, GA and CA; logistics and return steps are set out on the shipping and returns page.
What does the 10-pack bring the cost of one cartridge down to?
At $203.56 for ten, each TK162 costs $20.36, and the pack's 24,000 rated pages in total work out at roughly 0.85 cents per page at standard coverage. For a site standardizing on the FS-1120D, those are the two numbers that matter at budgeting time: a fixed per-change cost and a per-page figure you can apply to each department's page counts at year end.
How do we deal with empties when they arrive one at a time across a whole year?
Give the fleet one collection point. Each spent TK162 goes back into the packaging its replacement came out of and into a labeled empties box near the supply shelf; when the box is full, it leaves for a local recycling collection point in a single trip. Batching this way keeps ten small disposals from becoming ten errands, and the shelf never fills with loose cartridges.
Can part of this stock be sent on to another site later?
Yes — that is a practical advantage of how the pack is built. Every TK162 is sealed as an individual unit, so moving three or four boxes to a sister site changes nothing for the cartridges that stay behind or for the ones that travel. Just keep the same discipline at both ends: boxes stored flat and dry, oldest stock used first, and the code on the purchase paperwork matching what each shelf holds.
One printer in the fleet prints far more than the others. How should stock be allocated?
Let the machines draw from the common shelf by need rather than assigning boxes to printers in advance. The heavy user's FS-1120D might take five of the ten across the year while quieter machines take one each — that is the stock working as intended. A simple note of which machine took a cartridge, and when, keeps the annual count honest and shows you which printer's volume to plan around next year.
About This 10-Pack
Ten black TK162 cartridges, each rated at 2,400 pages, for sites running the FS-1120D at scale. Every unit is sealed separately for clean stock rotation across a year of printing. Priced at $203.56, this Kyocera-Mita compatible pack is backed by a 1-year warranty and 1-year free returns.
See Compatible Printers
Read more about our ink!
