SKU:

CS-CN-GI23-Y

Condition:

New (compatible)

OEM Part #:

GI-23

Color:

Yellow

Ink Type:

Dye

Volume:

57 ml

Page Yield:

About 3,800 4×6 photos per full 6-bottle set

Chip:

No chip — refill bottle

Warranty:

Lifetime Warranty

Returns:

1 Year

Frequently Asked Questions

Where does yellow show up in a photo print?

Almost everywhere warm light appears. Yellow builds sunlight, skin highlights, autumn color and sandy tones, and mixed with cyan it creates the green range from grass to foliage on the Canon PIXMA G620. A healthy yellow tank matters even when no pure yellow object is visible.

Which printer does this yellow bottle refill?

This GI-23 Yellow bottle is for the PIXMA G620 only — it refills that printer's yellow tank. The GI-23 family lists no other model, and other MegaTank generations use their own keyed bottle families. A bottle from a different GI series is not interchangeable, even with the same color name.

How does the keyed nozzle help when I refill the yellow tank?

Yellow is hard to judge by eye inside a tank, so the keying does the careful work. The nozzle seats only on the yellow opening, the ink flows hands-free with no squeezing, and the fill stops by itself at the full line. Cross-filling and overfilling are prevented by design.

What is the fill volume, and what photo yield is rated for this system?

The bottle holds 57 ml of dye ink, filled to the original specification. The rated figure covers the complete system: a full six-bottle set is rated at about 3,800 4×6 photos. Yellow use rises with sunny, outdoor and autumn subjects and falls with cool, blue-heavy work.

My prints have started to look too cool or blue — should I check yellow?

Yes, yellow belongs on that checklist. When it runs low, warm tones cannot be built properly, greens shift toward blue and skin loses warmth. Check the yellow tank before recalibrating anything — a refill takes minutes, while test-print troubleshooting can take an afternoon.

Is there a chip in the yellow bottle?

There is no chip and nothing to reset. This is a plain refill bottle, so the printer never needs to recognize it and no warning appears after a refill. Levels are tracked from the tank itself — a real advantage over chipped cartridges, especially after firmware updates.

Can this yellow bottle be used in a different GI printer family?

No. It is keyed and specified for the G620 tank system, and each GI family is built around its own tank design. The correct family is what guarantees the nozzle seats and the flow stops at the right level. Buy by GI number, not by color alone.

What is the right way to store leftover yellow ink?

Cap it with its own cap straight after refilling, store it upright and keep it out of direct sunlight and heat. The resealable cap keeps a part-used bottle ready for the next top-up. Yellow stains fabric readily, so wipe the nozzle before capping and store it where it cannot tip.

Should I replace yellow alone, or refresh all six colors together?

Alone is usually right — tanks empty at different rates. The other singles are GI-23 Black, GI-23 Cyan, GI-23 Magenta, GI-23 Red and GI-23 Gray. Choose the GI-23 Set of 6 when several levels are low at once.

What warranty and return window apply to this bottle?

The Clever Supplies Lifetime Warranty covers it, as it covers every inkjet bottle we sell. If it leaks, fails to fill properly or prints poorly, contact us for a replacement or refund. Returns are covered for 1 Year. It is a compatible bottle made to the original GI-23 specification.