null

0

Your cart is empty

FAX L300

Light, streaky faxes are the classic first sign that the Canon FAX L300's cartridge is nearing its end — and the cartridge in question is the FX-3, part number 1557A002BA. It is sold here as a single and in packs of two, three and five, with a premium-quality five-pack at the top of the range.

Most print-quality complaints on a fax machine trace back to the consumable, not the hardware. The cartridge is the part that lays toner onto every received page, so it is also the part that wears out on a schedule the machine cannot announce precisely. Before anyone books a service call for pale or streaked output, the sensible first step is the cheap one: rock the cartridge, and if that only helps briefly, replace it. Nine times out of ten the "machine fault" was a finished cartridge.

Toner Cartridges for FAX L300

CartridgeColorPage Yield
Canon FX-3 (1557A002BA), singleBlackSee product page
Canon FX-3, 2 packBlackSee product page
Canon FX-3, 3 packBlackSee product page
Canon FX-3, 5 packBlackSee product page
Canon FX-3 Premium Quality, 5 packBlackSee product page

Which cartridge should you buy?

If you are buying to confirm a diagnosis, buy the single. One fresh cartridge settles whether the machine or the supply was at fault, and there is no sense stocking a shelf for a machine that turns out to need repair. Once a swap has proved the point — output back to full black — move up the range: the two-pack restores your spare, and the three- and five-packs keep a proven machine supplied without repeat orders. The premium five-pack is the same cartridge count from the store's higher line. Yield does not change between listings; only the quantity does.

Chip, toner and everyday use

The rocking technique deserves doing properly. Take the cartridge out, hold it level, and tilt it gently from side to side five or six times so the remaining toner spreads evenly instead of sitting in one corner. Never shake it hard, and hold it over paper in case of stray dust. Refit it and print a page: if the output is even again, you have borrowed time, not restored the cartridge — order its replacement the same day. If a brand-new cartridge also prints light, stop buying toner; the fault sits in the machine.

Frequently Asked Questions

Why are faxes from my L300 printing light?

Almost always a cartridge at the end of its toner. Pale, streaked or one-sided output is how fax cartridges announce themselves; rocking or replacing the FX-3 is the first fix to try.

Which cartridge does the FAX L300 take?

The FX-3, Canon part number 1557A002BA. Every listing on this page is that cartridge, in pack sizes from one to five.

Does shaking the cartridge actually help?

Gentle rocking, yes — briefly. It redistributes the toner that remains and can carry a fading cartridge through a few more days of clean pages, which buys time for the replacement to arrive.

Does this machine need a separate drum as well?

No separate drum is listed for this page — the FX-3 cartridge is the consumable on offer. If a new cartridge does not restore full, even black, have the machine itself checked.

SELECT YOUR PRINTER FAMILY TO SHOP FAX L300 PRODUCTS