null

0

Your cart is empty

Lanier LD130CSR

The Lanier LD130CSR is the SR trim of Lanier's compact color multifunction line: the same small-footprint color engine as the LD130C, configured for offices that want finishing capability without stepping up to a departmental machine. It prints, copies and scans in color, and it feeds from the C300 toner family. Black is cartridge 841295, rated for approximately 8,300 pages, while cyan is 841296, rated for approximately 10,000 pages. Both cartridges on this page are compatible replacements built for this family, and each color is replaced on its own — there is no combined color unit to swap out early.

The SR configuration earns its place in offices that produce finished documents all day: stapled handouts for meetings, collated report sets, client packets that leave the building ready to read. A compact color MFP with finishing covers work that would otherwise mean a walk to a larger machine or a trip to a print shop. And because the LD130CSR draws from the same two cartridges as the rest of the LD130 and LD140 range, whoever stocks the supply cabinet only has one short family list to keep track of.

Toner Cartridges for Lanier LD130CSR

CartridgeColorPage Yield
Compatible Ricoh C300 (841295) Toner Cartridge BlackBlackApprox. 8,300 pages
Compatible Ricoh C300 (841296) Toner Cartridge CyanCyanApprox. 10,000 pages

Which cartridge should you buy?

Only two cartridges serve this machine, and they do not run out together. The black 841295 is rated lower than the cyan — about 8,300 pages against roughly 10,000 — and in most offices black also does the heavier work, since text pages dominate. Expect to change black more often, and keep a spare 841295 on the shelf so a long finishing run never stalls mid-job. Cyan is replaced only when the machine calls for it; there is no benefit in changing a color early, and the single-cartridge layout means you never throw away unused color toner. Every cartridge on this page is a compatible replacement covered by a 1-year warranty with 1-year returns.

Chip, toner and everyday use

Swap a cartridge when the LD130CSR reports low toner rather than at the first faint page: a gentle shake, side to side, redistributes the remaining powder and often restores even coverage for a while longer. Seat the new cartridge firmly until it clicks so the chip reads cleanly, and run one test page before the next big finishing job. The ratings assume about 5% coverage per page, so graphics-heavy color work will empty a cartridge sooner than the number on the box suggests. Store spares flat, sealed, and out of direct sunlight.

Frequently Asked Questions

Which toner cartridges does the Lanier LD130CSR use?

It takes the C300 family: black 841295 (approx. 8,300 pages) and cyan 841296 (approx. 10,000 pages). Those are the two cartridges listed above, both compatible replacements made for this family.

Does the LD130CSR use the same toner as the LD130C?

Yes. The SR trim changes the finishing hardware, not the engine, so consumables cross over completely between the LD130C and the LD130CSR — and across the LD140C and LD140CSR as well.

Why is the cyan cartridge rated for more pages than the black?

The ratings come from the cartridge designs themselves: the cyan 841296 carries a roughly 10,000-page rating while the black 841295 is rated near 8,300. In practice black usually empties first anyway, because most office pages are text.

Are these original Lanier cartridges?

No — they are compatible replacements for the C300 family, built to match the originals in fit and yield, and backed by a 1-year warranty and 1-year returns.

More printers that use the same cartridges

The C300 toner family is shared well beyond this model — these printers take the same cartridges: Aficio C230, Aficio C230SR, Aficio C240, Aficio C240SR, Aficio MP C300, Aficio MP C300SR, Aficio MP C400, Aficio MP C400SR, Aficio MP C401, Aficio MP C401SR, Lanier LD130C, Lanier LD140C, Lanier LD140CSR.

SELECT YOUR PRINTER FAMILY TO SHOP Lanier LD130CSR PRODUCTS