KM-1635
Positioned in Kyocera Mita's KM copier family, the KM-1635 is a monochrome workgroup copier in the classic KM tradition — sturdy, straightforward, and economical to run day after day. Like its close relative the KM-1620, it takes the TK410 toner kit, Kyocera part number 370AM010, rated for approximately 15,000 pages.
Where this model earns its place is connectivity and paper work: network printing lets a whole workgroup share it as both copier and printer, and expanded paper handling takes some of the babysitting out of long runs. The supply story stays as simple as the smaller machine's — one kit, a long interval between changes, and a cost per page that keeps copy-heavy departments calm.
Toner Cartridges for KM-1635
| Cartridge | Color | Page Yield |
|---|---|---|
| TK410 | Black | 15,000 pages |
Which cartridge should you buy?
There is a single kit on this page because there is a single kit for the machine — the buying decision is really about stocking. A workgroup sharing the KM-1635 for copying and network printing will work through roughly 15,000 pages per kit; keep one spare in the cabinet and the machine never waits. Offices running several KM models from the family below can hold one common spare pool, since every one of them drinks from the same TK410 kit. The compatible kit is backed by a 1-year warranty and 1-year returns.
Chip, toner and everyday use
Changing the kit is a minutes-long job: open the front, swap the unit, and let the machine confirm the new toner level. Ratings follow ISO/IEC 19752 at about 5% coverage — a workgroup printing dense network jobs alongside its copying should expect real-world counts under the headline figure. If a long run starts to fade near a kit's end, rocking the cartridge gently side to side can redistribute the toner and finish the run. Keep the spare sealed and stored flat.
Frequently Asked Questions
What's the difference between the KM-1635 and the KM-1620?
Both are KM-series copiers running the same TK410 toner kit. The KM-1635 adds network printing and expanded paper handling over the base KM-1620, which is why it is the one usually shared by a whole workgroup.
Which toner kit does the KM-1635 take?
The Kyocera TK410 black toner kit (370AM010), rated for approximately 15,000 pages per ISO/IEC 19752.
Can one spare kit cover several machines?
Yes — the KM-1620, KM-1650, KM-2035 and KM-2050 all run on the same kit, so a mixed KM fleet needs only one spares shelf.
How will I know the toner is running low?
The machine reports its toner status as the kit empties; with a 15,000-page kit there is plenty of warning to have the next one ready before the current one gives out.
More printers that use the same cartridges
The KM-1635 shares the TK410 toner kit with: KM-1620, KM-1650, KM-2035, KM-2050.