KM-1620
The Kyocera Mita KM-1620 is a no-nonsense monochrome copier from the KM office line, built for copy-centric departments that need dependable output without frills. It is fed by a single toner kit, the TK410 — Kyocera part number 370AM010 — rated for approximately 15,000 pages per ISO/IEC 19752. On copy-heavy work, that yield is what keeps the cost per page firmly in check.
This machine represents the straightforward KM tradition: sturdy hardware, economical running costs, and nothing in the supply chain more complicated than one kit that drops in when the old one is done. Departments that measure a copier by how rarely it asks for attention will recognize the appeal — the KM-1620 was specified to be filled, forgotten, and filled again.
Toner Cartridges for KM-1620
| Cartridge | Color | Page Yield |
|---|---|---|
| TK410 | Black | 15,000 pages |
Which cartridge should you buy?
The shelf could hardly be simpler: one kit, one yield. The TK410's roughly 15,000 pages mean a copy room can run for long stretches between changes, so most sites keep a single spare kit beside the machine and reorder when it goes in. If your department runs more than one model from the family list below, the same kit covers all of them — a shared spare is a sensible way to stock. The compatible kit here is backed by a 1-year warranty and 1-year returns.
Chip, toner and everyday use
Slide the new kit in until it seats, and the copier is ready — this generation reports its toner status plainly, with no menus to dig through. The 15,000-page rating assumes about 5% coverage; a department copying dense forms and handouts all day will see fewer pages, which is normal. Toward the end of a kit, a gentle rock of the cartridge can level the remaining toner and carry you to the end of a job. Store the spare kit flat and sealed, away from heat.
Frequently Asked Questions
Which toner does the KM-1620 use?
The Kyocera TK410 black toner kit (part number 370AM010), rated for approximately 15,000 pages.
Which other models use the TK410 kit?
The same kit serves the KM-1635, KM-1650, KM-2035 and KM-2050 — handy if your office runs a mixed fleet of KM copiers.
How long will one kit last in a copy room?
At the rated 15,000 pages, divide by your monthly copy volume: a department making 1,500 copies a month is looking at the better part of a year per kit, before coverage differences are taken into account.
Are compatible TK410 kits a safe choice for this copier?
Yes — the compatible kit is built to the same fit and specification, and it is covered by a 1-year warranty with 1-year returns if anything falls short in normal use.
More printers that use the same cartridges
The KM-1620 shares the TK410 toner kit with: KM-1635, KM-1650, KM-2035, KM-2050.