SKU:

TK-5152-4CS

Printer Brand:

Kyocera-mita

OEM Number:

1T02NS0US0, 1T02NSCUS0, 1T02NSBUS0, 1T02NSAUS0

Ink Color:

Black, Cyan, Magenta, Yellow

Page Yield:

Black: 12,000, Colors: 10,000 Each

Printer Type:

Laser Cartridge Set

Condition:

New Compatible

Frequently Asked Questions

Four different codes are printed on this set — which cartridge is which?

The TK-5152 set carries one cartridge per slot, and each one has its own part number: 1T02NS0US0 (TK-5152K) is black, 1T02NSCUS0 (TK-5152C) is cyan, 1T02NSBUS0 (TK-5152M) is magenta and 1T02NSAUS0 (TK-5152Y) is yellow. The color is also printed on every individual box, so when only one slot runs dry later you can reorder that single color by its own code instead of buying a whole set again.

What exactly arrives in the box?

Four individually sealed cartridges — one black, one cyan, one magenta and one yellow. Nothing is bundled loose: each unit is in its own packaging inside the set, so any cartridge you do not need today stays sealed and fresh until its slot calls for it.

Why is the black rated at 12,000 pages when the colors are 10,000?

That split is how the TK-5152 family is rated by design. The black cartridge (1T02NS0US0) carries a 12,000-page rating; cyan, magenta and yellow are each rated at 10,000 pages. In most offices black also does the heavier share of everyday text printing, so the larger black capacity matches how these machines are actually used.

Do I have to install all four cartridges at once?

No. Replace only the slot the printer reports as empty and keep the other three sealed in the box. There is no requirement to change colors in a group — each cartridge works independently, and a sealed spare stores far better than one sitting half-used in a drawer.

How should I store the cartridges I am not installing yet?

Keep them sealed, flat, indoors and away from direct sunlight and heat sources. A normal office shelf or supply cabinet is fine. Write the purchase date on the outer box if you rotate stock, and always open the oldest sealed cartridge first.

What happens if one cartridge in the set turns out to be faulty?

Each cartridge is covered on its own. This set comes with a 1-year warranty and 1-year free returns — the full terms are on our shipping & returns page. A problem with one unit never means sending the other three back; contact us and we will sort out just that cartridge.

What should I verify first when this set arrives?

That all four codes are present and correct: 1T02NS0US0 for black, 1T02NSCUS0 for cyan, 1T02NSBUS0 for magenta and 1T02NSAUS0 for yellow. Check them against the individual box labels before the set goes on the shelf. Catching a picking error on arrival day is a quick exchange; discovering it months later, with a slot empty and the wrong code in hand, is a much worse moment.

Two slots run out in the same week — in what order should I fit the cartridges?

One at a time, with a test page between them. Fit the first cartridge, print a page and confirm that color has come back clean, then fit the second. Changing two at once works, but if output still looks off afterwards you cannot tell which swap is responsible. The TK-5152K black and the colors all work independently, so there is no penalty for staging the changes minutes apart.

How can I work out when to order the next set?

Note the install date on each box as you fit it. The black is rated at 12,000 pages and the colors at 10,000, so the dates your first set went in, set against your monthly volume, predict the next cycle closely. Most workgroups find the black slot calls first; when its warning appears, that is the natural moment to review the other three gauges and order whatever the shelf is short of.

What should I do with the empty cartridges from this set?

Return each empty to the box its replacement came in and route it out for recycling or disposal as it appears. Four slots emptying on staggered schedules means empties arrive one by one rather than all together — a small collection box near the M6035cidn or M6535cidn keeps spent 1T02NS units from mixing with the sealed stock still waiting its turn.

About This TK-5152 Four-Color Set

This is the complete TK-5152 color set for the Kyocera ECOSYS M6035cidn and M6535cidn, priced at $85.39 for all four cartridges. It is the practical choice when a workgroup printer is coming due on several colors at once, or when you want one box on the shelf that covers every slot the machine has. Buying the colors together also means the whole printer goes back to a known starting point on the same day, which makes the next replacement cycle easier to predict.

Orders leave from our warehouses in IL, PA, GA and CA, so delivery time depends on which one is closest to you. If you are matching this set against a printer in front of you, the range it belongs to is the Kyocera Mita ECOSYS color line. Questions before or after ordering: our support team answers Monday through Friday, 9 AM to 5 PM CST.