Frequently Asked Questions
Why would I order three cartridges at once?
Because the moment a printer runs dry is never a convenient one. With this 3-pack at $54.91, one cartridge goes into the machine and two sealed spares wait in the drawer, so a toner warning never turns into a stopped workday or a rush order.
Are the three cartridges packed separately?
Yes. Each TK-132 (part number 1T02HS0US0) is individually sealed inside the outer box, so you open one at a time and the others stay fresh and protected until the day they are needed.
How do I confirm these fit the machines in our office?
Match the code, not the box shape. The cartridge your printer asks for is the TK-132; check the label on a spent unit or the supply screen and you will see that code. These cartridges serve the FS-1028mfp, the FS-1128mfp and the FS-1300D, so one pack can cover more than one model.
Can the pack be split between two different printers?
It can. Since every unit in the pack is the same cartridge, you might load one into the multifunction unit by reception and keep the remaining pair for the FS-1300D down the hall. There is no pairing or registration tying a cartridge to a single machine.
How should the spares be stored?
Keep them sealed, flat, and indoors at normal room temperature, away from radiators and sunny windowsills. Stored that way, a spare sits patiently for many months and is ready the moment the installed cartridge gives out.
If one cartridge in the pack has a problem, what happens?
Each unit stands on its own. Every cartridge in the pack is covered by a 1-year warranty with free returns for the first year, and our support team is on hand Monday through Friday, 9 AM to 5 PM CST to sort out any single unit.
What happens if a cartridge gives out in the middle of a long print run?
The printer stops and flags that the toner is empty; the job waits rather than printing blank pages. Lift out the spent TK-132, rock one of the sealed spares from this 3-pack gently to settle its toner, slide it in, and the machine picks the run back up. From warning to printing again takes only a few minutes.
How can we forecast when this 3-pack will be used up?
Write the install date on each box and note the machine's page counter at the same time. Each TK-132 is rated at 7,500 standard pages, so the counter readings between changes show your true consumption. Two or three entries are enough to see whether a cartridge lasts your office a month or a season, and to time the next order accordingly.
How do I know one of the stored spares is still in good shape when its turn comes?
Look for three things: the seal unbroken, the box dry and undamaged, and no sign the cartridge has been dropped. If all three hold, rock the unit gently side to side before fitting it to level the toner after its time on the shelf. A spare kept sealed indoors stays ready for many months.
What is the tidy way to handle the three empties this pack will produce?
As each TK-132 comes out of a machine, drop it back into its own box and keep the boxed empties together in a corner of the supply cupboard. When the pack is finished, take the three boxes to a toner recycling point or office-supply take-back in a single trip. Boxing them as you go contains stray powder and keeps the count obvious.
About This 3-Pack
Sold as a set of three compatible Kyocera-Mita TK-132 black toner cartridges (ordering code 1T02HS0US0), this pack is built for offices that keep a working spare on hand. The cartridges fit the FS-1028mfp along with the FS-1128mfp and FS-1300D, and each one is rated at 7,500 pages before it needs changing again. All three units carry the same year of warranty protection and free returns. Your pack ships from whichever of our IL, PA, GA and CA warehouses sits closest to you — see the shipping and returns page for the details.
See Compatible Printers
Read more about our ink!
