null

0

Your cart is empty

Xpress M2875FD

Konica Minolta Xpress M2875FD printer

Fax and duplex together define the Xpress M2875FD: incoming faxes print on their own, double-sided, without anyone feeding paper or clearing a tray. It is the set-and-forget document station of the M2875 platform. Its toner comes from the MLT-D116 family, and this page stocks the high-yield MLT-D116L. A separate MLT-R116 imaging unit forms the image and lasts roughly 9,000 pages.

Machines that work unattended need consumables that match their autonomy. An FD model sitting in a back office or records room may go days between human visits, so the sensible strategy is capacity in every part: the longest-running toner on this page, a drum that outlasts several cartridges, and a spare stored in the same room as the printer itself.

Toner Cartridges for Xpress M2875FD

CartridgeColorPage Yield
MLT-D116L High YieldBlackSee product page
MLT-D116L High Yield — 3 PackBlackSee product page
MLT-D116L Premium High Yield — 5 PackBlackSee product page
Xpress M2875FD High YieldBlackSee product page
Xpress M2875FD High Yield — 5 PackBlackSee product page

Imaging drum (replaced separately):

  • MLT-R116 drum unit — Black — approximately 9,000 pages. Its long life is what lets this model run unattended for extended stretches.

Which cartridge should you buy?

Treat the MLT-D116L as the default for the Xpress M2875FD. A machine bought for autonomy should not be the one that stops first, and the high-yield cartridge stretches the interval between visits further than the family's standard MLT-D116S can. The S fits the same slot and is fine for a nearly silent fax line, but it works against the point of this model. The 3-pack and 5-pack listings reduce supply trips to a room nobody passes often, and the MLT-R116 drum — roughly 9,000 pages — will typically span several toner changes before it asks for attention.

Chip, toner and everyday use

On installation, the chip on the compatible cartridge registers with the Xpress M2875FD and level reporting continues as normal, which matters for a machine nobody stands next to: check the level whenever you pass, not when output fails. Toner yields are calculated at 5% coverage, so heavy fax days of dense forms will land below the rating while plain correspondence lands close to it. If a page comes out light, rocking the cartridge gently side to side levels the toner for the remaining pages. Keep the spare sealed and stored flat in the printer's room, away from heat sources, so whoever finds the machine empty can fix it on the spot.

Frequently Asked Questions

The display says to replace the imaging unit. What is that?

That message refers to the MLT-R116 drum unit, a separate part from the toner cartridge. It is rated for roughly 9,000 pages. Replacing it does not require changing the toner, and a toner swap does not clear the drum message.

Does automatic duplexing on incoming faxes save toner?

It saves paper — each fax prints on both sides — but toner use per printed side stays the same. What duplexing really protects on this model is the paper tray, which empties half as fast.

How long will the MLT-D116L last in a fax-heavy office?

It depends on fax traffic, which is why this page points to the rated yield on the product page rather than a promise. The high-yield cartridge is stocked here precisely because fax-heavy offices burn through standard fills quickly; expect the L to roughly double the interval between changes compared with the standard size.

Can I use the standard MLT-D116S in the Xpress M2875FD?

Yes, it fits the same way. Just know that on a machine designed to run unattended, the shorter-lived cartridge is usually the first thing to interrupt it.

SELECT YOUR PRINTER FAMILY TO SHOP Xpress M2875FD PRODUCTS