Xpress M2675FN
Fax plus network on the mid-range mono engine: the Xpress M2675FN covers the office that still faxes but has moved everything else onto the LAN. It runs the two-piece MLT-D116 system — toner cartridge plus the separate MLT-R116 drum (~9K pages) — which means a worn drum never forces you to throw away half-full toner. Our compatible MLT-D116S/D116L cartridges keep the consumable side of this MFP inexpensive.
Toner Cartridges for Konica Minolta Xpress M2675FN
This printer works with the following toner cartridges:
- Konica Minolta MLT-D116L
- Konica Minolta MLT-D116S
- Konica Minolta MLT-R116
Frequently Asked Questions
Should I get the MLT-D116S or the MLT-D116L for the Xpress M2675FN?
Both fit the Xpress M2675FN the same way; the MLT-D116L high-yield cartridge holds more toner and delivers a lower cost per page, while the MLT-D116S standard cartridge is cheaper upfront. A mono all-in-one with fax, Ethernet and a separate drum with regular volume benefits from the L — fewer interruptions and cheaper pages. Occasional printers should stick with the S, since toner slowly degrades and there is no advantage in buying capacity that sits unused for a year.
The Xpress M2675FN says to replace the imaging unit. Is that the same as the toner?
No — the Xpress M2675FN keeps toner and imaging separate. The MLT-D116S or MLT-D116L is the toner cartridge you swap regularly; the MLT-R116 imaging unit (drum) lasts through multiple toner cartridges and is replaced far less often. A replace-imaging-unit message means drum print quality has degraded, not that toner is out. Swapping toner will not clear a drum warning, and vice versa.
How do I tell genuine MLT-D116 toner and MLT-R116 drums from compatibles?
Genuine units ship in OEM-sealed packaging with holographic security labels; compatibles are marked compatible with MLT-D116S/MLT-D116L or MLT-R116 without OEM branding. The Xpress M2675FN accepts either mechanically, but compatibles vary in chip acceptance and, for drums, in coating quality that affects page life. Print a test page immediately and keep all packaging until output quality is confirmed.